Removing and installing belt height adjustment

⇒ 1.4.1 Removing and installing belt height adjuster, 2-door models

⇒ 1.4.2 Removing and installing belt height adjuster, 4-door models

1.4.1 Removing and installing belt height adjuster, 2-door models

6R 2009–2014 Removing

Special tools and workshop equipment required

• Torque wrench - V.A.G 1331-

6C 2014–2017 Removing

• Remove bench seat ⇒ 2.1 Removing and installing bench seat / individual seats.
• Remove backrest ⇒ 2.2 Removing and installing rear seat backrest.
• Release sill panel moulding from fasteners in sill at transition to side panel.
• Remove side trim panel ⇒ 5.7 Removing and installing side trim panel.
• Release B-pillar trims (2-door models) ⇒ 5.3.1 Detaching and attaching B-pillar trim, 2-door models.

• Unscrew bolt -1- (40 Nm) and remove belt guide fitting -2- from belt height adjuster.

• Remove bolt -1- (20 Nm) and remove belt height adjuster -2- from mountings in support bracket.

Installing

• Install in reverse order of removal.

1.4.2 Removing and installing belt height adjuster, 4-door models

Only what differs from the procedure above; everything else is as above.

Removing

• Releasing upper B-pillar trims from mountings (4-door models) ⇒ 5.3.2 Detaching and attaching B-pillar trim, 4-door models.