Removing and installing side trim panel

Removing

• Remove bench seat ⇒ 2.1 Removing and installing bench seat / individual seats.
• Remove backrest ⇒ 2.2 Removing and installing rear seat backrest.
• Release sill panel moulding from fasteners in sill at transition to side panel.
• Prise out clip -1-.
• Unclip side panel trim, starting at rear.

• If fitted, disconnect connector from interior monitor switch - E183-.

Installing

6C 2014–2017

It is not possible to install the side panel trim without problem if clips are in -position 2-.

• Install in reverse order of removal.