1.4 MPI engine (EA111) · Crankshaft group · Cylinder block, sealing flange
Assembly overview
Aluminium cylinder block
- 1 10 Nm
- 2 Suction line
- 3 Aluminium cylinder block
- 4 Knock sensor
- 5 20 Nm
- The specified torque influences the function of the knock sensor.
- 6 60 Nm + 1/4 turn further (90°)
- Renew
- 7 Flywheel/drive plate
- When removing and installing flywheel, lock with counterhold - 3067-.
- Removing and installing drive plate on vehicles with an automatic gearbox ⇒ 2.5 Removing and installing drive plate.
- 8 12 Nm
- Renew
- 9 Sealing flange with sender wheel and oil seal
- With engine speed sender - G28-
- Specified torque for engine speed sender: 5 Nm
- Renew complete with oil seal and sender wheel only.
- Removing and installing sealing flange ⇒ 2.8 Renewing crankshaft sealing flange - flywheel end ( assembly tool - T10017- ).
- 10 Seal
- Renew
- 11 Oil pump
- Renew only as complete unit
- Must seat on dowel sleeves.
- Removing and installing ⇒ 1.4 Removing and installing oil pump
- 12 Sealing ring
- 13 Follower
- Coat with oil before installing oil pump.