1.4 MPI engine (EA111) · Mixture preparation – injection · Injection system
Fuel rail with injectors – assembly overview and fastening
- 1 Supply pipe
- Black with white marks.
- Ensure firm seating.
- Secure with spring-type clips
- From fuel filter.
- 2 10 Nm
- 3 Fuel distributor
- Removing and installing ⇒ 1.10 Checking injectors
- 4 Bleeder valve
- For fuel system
- Bleeding fuel system ⇒ 1.10 Bleeding fuel system.
- 5 Retaining clip
- Check for firm seating
- Ensure correct seating on injector and fuel rail
- 6 O-ring
- Renew
- Before installing, moisten lightly with clean engine oil.
- 7 No. 4 cyl. injector - N33-
- No. 1 cyl. injector - N30-
- No. 2 cyl. injector - N31-
- No. 3 cyl. injector - N32-