1.4 MPI engine (EA111) · Mixture preparation – injection · Injection system
Intake manifold – assembly overview and fastening
- 1 Intake manifold
- 2 Sealing ring
- Renew
- 3 7 Nm
- 4 Throttle valve module - J338-
- Cleaning ⇒ 1.9 Cleaning throttle valve module - J338-
- If renewed, erase learnt values and adapt engine control unit to throttle valve module ⇒ Vehicle diagnostic tester “Guided functions”
- 5 20 Nm
- 6 Hose
- To brake servo.
- 7 O-ring
- Renew
- 8 Coolant hose
- For crankcase breather preheater
- 9 Spring-type clip
- Remove and install using hose clip pliers - VAS 6340- or springtype clip pliers - VAS 5024A-
- 10 Crankcase breather preheater
- To remove and install, remove intake manifold
- 11 3 Nm
- 12 Hose
- To crankcase breather vacuum valve
- 13 Intake manifold pressure sender - G71- with intake air temperature sender - G42-.
- Clipped onto intake manifold.