1.4 MPI engine (EA111) · Mixture preparation – injection · Injection system
Removing and installing air filter housing
Removing
- Press latches -arrows- and pull air intake connecting piece out of intake air duct.
- Pull hose -1- off non-return valve.
- Pull air filter housing upwards off locating pins -2-.
Installing
Install in reverse order. During this step, observe the following:
- Push air filter housing onto locating pins -2- from above.
- Connect hose -1- to non-return valve.
- Press air intake connecting piece in intake air duct until the fasteners -arrows- engage audibly.