Supporting engine in installation position

⇒ 2.2.1 Installing support bracket (Polo)

2.2.1 Installing support bracket (Polo)

Special tools and workshop equipment required

• Support - 10-222 A-
• Adapter - 10 - 222 A /8-
• Hook - 10-222 A/10-
• Shackle - 10-222 A/12-

To prevent damage to edges of wings, cover lower areas of both adapters - 10 - 222 A /8- with duct tape -arrow- ⇒ Electronic parts catalogue (ETKA, chemical substances).

Procedure

• Set up support bracket - 10 - 222 A- with necessary adapters as illustrated and support engine in installation position.

• Pay attention to paintwork on edges -arrows-.

It is only necessary to secure the two adapters - 10 - 222 A /8- with the tensioning straps - T10038- when removing the gearbox.