1.2 TDI CR engine (EA189) · Removing and installing engine · Assembly mountings

Assembly mountings – assembly overview and fastening

Assembly overview - assembly mountings

Engine bracket - specified torques and tightening sequence

  • Tighten bolts in 3 stages in the sequence shown:
StageBolts 1)Specified torque/turning further angle
1)-1 … 3-7 Nm
2)-1 … 3-40 Nm
3)-1 … 3-Turn 180° further
1) Renew

Engine mounting

-A- 1)20 Nm + turn 90°
-B- 1)30 Nm + turn 90°
-Arrow-Must not be loosened
1) Renew

Pendulum support

-A- 1)30 Nm + turn 90°
-B- 1)40 Nm + turn 90°
-Arrow-Must not be loosened
1) Renew

Gearbox mounting

-A- 1)40Nm + turn 90°
-B- 1)40 Nm + turn 90°
1) Renew