1.2 TDI CR engine (EA189) · Turbocharging/supercharging · Turbocharger
Turbocharger with attachments – assembly overview and fastening
- 1 Intake connecting pipe
- 2 Bolt
- 9 Nm
- Attached in inlet connection to prevent loss.
- 3 O-ring
- Renew
- 4 Bolt
- 10 Nm
- 5 Bracket
- For electrical cables
- 6 Heat shield
- 7 Seal
- Renew
- 8 Turbocharger
- Can only be renewed complete with exhaust manifold and vacuum unit.
- Removing and installing ⇒ 1.1 Assembly overview - turbocharger with attachments
- 9 Nut
- 24 Nm
- 10 Exhaust gas temperature sender 1 - G235-
- Tightening exhaust temperature sender 1 - G235- ⇒ 1.2 Removing and installing turbocharger
- 11 Union
- For oil supply line.
- Must not be loosened
- 12 Nut
- 24 Nm
- 13 Heat shield
- 14 Retaining ring
- Installation possible in one position only.
- 15 Seal
- Renew
- 16 Bolt
- 9 Nm
- 17 Pulsation damper
Installation position of exhaust gas temperature sender with angled cable guide