Installation position of clamp

Specified torque and mounting dimensions of clamping sleeve.

Clamp -A- with 2 individual clips.

Specified torque: 25 Nm

Installation dimensions -a- 5 mm (only for front clamp)

Clamp -B- with continuous clip.

Specified torque: 35 Nm

Installation dimensions -a- 8.5 mm (only for front clamp)

Installation dimension -a- for vehicles with marking -A- on front exhaust pipe

• 1 Clamping sleeve
• 2 Front exhaust pipe
• 3 Securing nut
• 4 Securing nut

a - Installation dimension

A - Marking

Installation position of front clamp

• Install clamp so that end of bolt -arrow- does not extend beyond lower edge of clamp.

• Threaded connection faces right

Installation position of rear clamp

• Install clamp so that end of bolt -arrow- does not extend beyond lower edge of clamp.

• Threaded connection faces to rear.