Removing and installing cover for centre console

Special tools and workshop equipment required

• Torque wrench - V.A.G 1783-

Removing

• 6R 2009–2014 Remove dash panel middle trims ⇒ 2.9 Removing and installing dash panel middle trims.
• Release gear lever gaiter or selector cover from mountings ⇒ Rep. gr. 34; Selector mechanism; Assembly overview – gear knob and cover.
• 6C 2014–2017 Remove mounting frame for radio/navigation system ⇒ 3.1 Removing and installing mounting frame for radio/navigation system.
• Remove trim for operating and display unit ⇒ 3.3 Removing and installing trim for operating and display unit.
• Remove bolts -1- and -2- (1.5 Nm).
• Push down tabs -3-.
• Detach cover from centre console by moving in direction of rear bench seat.

Installing

• Install in reverse order of removal.