1.4 MPI engine (EA111) · Ignition system · Ignition system

Parts of ignition system – assembly overview and fastening

  • 1 Connector
    • Black, 4-pin.
  • 2 Ignition coil 3 with output stage - N291-
    • Remove using puller - T10094-.
    • Ignition coil 1 with output stage - N70-
    • Ignition coil 2 with output stage - N127-
    • Ignition coil 4 with output stage - N292-
  • 3 Connector
    • Black, 2-pin.
    • For knock sensor 1 - G61-.
    • Connector contacts are gold-plated.
  • 4 Knock sensor 1 - G61-
    • Connector contacts are gold-plated.
  • 5 20 Nm
    • The specified torque influences the function of the knock sensor.
  • 6 Connector
    • Black, 3-pin.
    • For Hall sender - G40-.
  • 7 Hall sender - G40-
  • 8 O-ring
    • Renew if damaged
  • 9 10 Nm
  • 10 Spark plug, 25 Nm
  • 11 Wiring guide
    • Bolt to camshaft housing with 5 Nm torque.
  • 12 Earth cable
    • Loosen or tighten only with ignition switched off.
  • 13 10 Nm
    • Loosen or tighten only with ignition switched off.