1.2 TDI CR engine (EA189) · Technical data · Technical data

Engine number/engine data

Four digit engine codes

The first 3 digits refer to the mechanical configuration of the engine. The first 3 digits are embossed on engine.

The fourth digit indicates the output of the engine. It depends on the engine control unit.

The four-digit engine code can be found on the identification plate, the vehicle data sticker and on the engine control unit.

The engine number (“engine code” and “serial number”) can be found at the joint between engine and gearbox -arrow-.

In addition, there is a sticker on the toothed belt guard with “engine code” and “serial number”.

The engine codes can also be found on the vehicle data sticker.

The engine number consists of up to 9 characters (alphanumeric). The first part (maximum 4 characters) makes up the “engine code”, and the second part (6 characters), the “serial number”. If more than 999,999 engines were produced with the same code letters, the first of the six digits is replaced by a letter.

Engine data

CodesCFWA
Manufactured01.10 ►
Displacement l1.2
Power kW at rpm55/4200
Torque Nm at rpm180/2000
Bore ∅ mm79.5
Stroke mm80.5
Valves per cylinder4
Compression ratio16.5
Fuel: acc. toDIN EN 590
Firing order1-2-3
Catalytic converterYes
Diesel particle filterYes
Exhaust gas recirculationYes
ChargingYes
Charge air coolingYes