# Drive shafts, output shafts and differential – SSP 390 The 7-speed Double-clutch Gearbox 0AM

> The two drive shafts, the three output shafts with their gears and the differential, each with its position in the gearbox.

- Web page: https://catalog.polo.blue/self-study/ssp-390-7-speed-double-clutch-gearbox-0am/shafts-and-differential/
- Original document (PDF): https://cdn.polo.blue/files/SSP-390-7-speed-double-clutch-gearbox-0AM.pdf

## Drive shafts

![Drive shafts (S390\_046)](https://catalog.polo.blue/instructions/ssp-390/30e4cda53624ee5b.webp)

The drive shafts are located in the gearbox housing. Each drive shaft is connected to a clutch via splines. These transfer the engine torque onto the output shafts according to the gear which is engaged. Drive shaft 2 is hollow. Drive shaft 1 runs through hollow drive shaft 2. A ball bearing, which is used to mount the drive shafts in the gearbox housing, is located on each shaft.

![Drive shafts (S390\_019)](https://catalog.polo.blue/instructions/ssp-390/ba11d615a7e4c970.webp)

## Drive shaft 2

Due to its installation position, drive shaft 2 will be described before drive shaft 1.

![Drive shaft 2 (S390\_020)](https://catalog.polo.blue/instructions/ssp-390/41a8e47bc9c2d658.webp)

Drive shaft 2 is designed as a hollow shaft. It is connected to K2 via splines. Drive shaft 2 is used to shift gears 2, 4, 6 and R. To record the gearbox input speed, this shaft has the gear for gearbox input speed sender 2 G612.

## Drive shaft 1

![Drive shaft 1 (S390\_021)](https://catalog.polo.blue/instructions/ssp-390/572d24bc556d221e.webp)

Drive shaft 1 is connected to clutch K1 via splines. It is used to shift gears 1,3,5 and 7. To record the gearbox input speed, this shaft has the impulse wheel for gearbox input speed sender 1 G632.

> Please note that a strong magnet may destroy the impulse wheel for drive shaft 1. Further information on the impulse wheel can be found in [self-study programme 308](https://catalog.polo.blue/self-study/ssp-308-direct-shift-gearbox-dq250-02e/) "The Direct Shift Gearbox 02E".

## Output shafts

![Output shafts (S390\_023)](https://catalog.polo.blue/instructions/ssp-390/11d0d68c51a1d6e2.webp)

Three output shafts are contained in the gearbox housing. Depending on the gear which is engaged, the engine's torque is transferred from the drive shafts to the output shafts. An output gear, via which the torque is passed on to the differential final drive gear, is located on each output shaft.

## Output shaft 1

![Output shaft 1 (S390\_022)](https://catalog.polo.blue/instructions/ssp-390/2d7a9b076fc61ecc.webp)

The following are located on output shaft 1:

- The selector gears for gears 1, 2 and 3; the 3 gears are synchromeshed 3-fold.
- The selector gear for 4th gear; the 4th gear is synchromeshed 2-fold.

## Output shaft 2

![Output shaft 2 (S390\_025)](https://catalog.polo.blue/instructions/ssp-390/ec0603a9b7f9ed85.webp)

![Output shaft 2 (S390\_024)](https://catalog.polo.blue/instructions/ssp-390/b969bb9371787799.webp)

The following are located on output shaft 2:

- The 2-fold synchromeshed selector gears for gears 5, 6 and 7, and
- The intermediate gears R gear 1 and R gear 2 for reverse gear.

## Output shaft 3

![Output shaft 3 (S390\_027)](https://catalog.polo.blue/instructions/ssp-390/573a010b20ba3b3d.webp)

![Output shaft 3 (S390\_026)](https://catalog.polo.blue/instructions/ssp-390/0763dd90f9c5a808.webp)

The following are located on output shaft 3:

- The 1-fold synchromeshed selector gear for R gear
- The parking lock gear

## Differential

![Differential (S390\_029)](https://catalog.polo.blue/instructions/ssp-390/537e56bec95fbf85.webp)

![Differential (S390\_028)](https://catalog.polo.blue/instructions/ssp-390/9ce2dd3baab88fa7.webp)

The differential transfers the torque onwards to the vehicle's wheels via the drive shafts.
