# SSP 308 Direct Shift Gearbox 02E

> VW SSP 308 on the DSG 02E (DQ250), up to 350 Nm. A stronger DQ200 replacement for the Polo, ideal with the 1.4 TSI, 1.8 TSI, 2.0 TSI and 2.0 TDI.

- Web page: https://catalog.polo.blue/self-study/ssp-308-direct-shift-gearbox-dq250-02e/
- Original document (PDF): https://cdn.polo.blue/files/SSP-308-direct-shift-gearbox-DQ250-02E.pdf
- Whole programme in one file: https://catalog.polo.blue/self-study/ssp-308-direct-shift-gearbox-dq250-02e/full.md

This self-study programme is designed to help you understand the Direct Shift Gearbox.

There is also a multimedia CD available on the direct shift gearbox. This CD allows you to see how individual components work and how they combine with other components for operation of the gearbox.

From interactive menus, the subjects

- Selector lever
- Gearbox construction
- Oil lubrication circuit
- Selection actuators

can be chosen.

![Overview (S308\_001)](https://catalog.polo.blue/instructions/ssp-308/3544462f280fe50e.webp)

## Why it matters for the Polo

The 02E (DQ250) was never fitted to the Polo at the factory, but it is often used as a better replacement for the rather failure-prone DQ200 from [SSP 390](https://catalog.polo.blue/self-study/ssp-390-7-speed-double-clutch-gearbox-0am/). It takes much higher power and torque, up to 350 Nm according to this booklet, so it suits sporty cars.

Our recommendation, not VW's: it is ideal for the 1.4 TSI EA111, 1.4 TSI EA211, 2.0 TDI, 2.0 TSI and 1.8 TSI engines.

> **Note**
>
> This self-study programme shows the design and function of new developments! The contents will not be updated.
>
> For the latest testing, adjustment and repair instructions, please refer to the relevant service literature.

## Chapters

- [Introduction](https://catalog.polo.blue/self-study/ssp-308-direct-shift-gearbox-dq250-02e/introduction/index.md): Why a gearbox with two wet clutches joins the strengths of manual and automatic gearboxes: its features, weight, torque and oil volume.
- [Selector lever](https://catalog.polo.blue/self-study/ssp-308-direct-shift-gearbox-dq250-02e/selector-lever/index.md): The lever positions, control unit J587, lock solenoid N110 with its emergency release and the ignition key withdrawal lock.
- [Basic principle](https://catalog.polo.blue/self-study/ssp-308-direct-shift-gearbox-dq250-02e/basic-principle/index.md): Two transmission units in one housing, one for each clutch, and how the torque reaches them from the dual mass flywheel.
- [Multi-plate clutches](https://catalog.polo.blue/self-study/ssp-308-direct-shift-gearbox-dq250-02e/multi-plate-clutches/index.md): How the outer clutch K1 and the inner clutch K2 close under oil pressure and which gears each of them drives.
- [Input shafts, output shafts and differential](https://catalog.polo.blue/self-study/ssp-308-direct-shift-gearbox-dq250-02e/shafts-and-differential/index.md): The two input shafts, the two output shafts, the reverse shaft and the differential, each with its gears and position in the gearbox.
- [Parking lock](https://catalog.polo.blue/self-study/ssp-308-direct-shift-gearbox-dq250-02e/parking-lock/index.md): The parking lock in the differential: the cable from the selector lever, the locking pawl and its two springs.
- [Synchronisation](https://catalog.polo.blue/self-study/ssp-308-direct-shift-gearbox-dq250-02e/synchronisation/index.md): Three-fold synchronisation of 1st, 2nd and 3rd gear, simple synchronisation of 4th to 6th and the parts of each.
- [Torque transmission in the vehicle](https://catalog.polo.blue/self-study/ssp-308-direct-shift-gearbox-dq250-02e/torque-transmission/index.md): From the engine through the gearbox to the wheels, on front-wheel drive and with the Haldex coupling on four-wheel drive.
- [Transmission route through gears](https://catalog.polo.blue/self-study/ssp-308-direct-shift-gearbox-dq250-02e/transmission-route/index.md): The path of the torque through clutch, input shaft and output shaft to the differential in each of the six gears and in reverse.
- [Mechatronics module](https://catalog.polo.blue/self-study/ssp-308-direct-shift-gearbox-dq250-02e/mechatronics-module/index.md): The central control unit of the gearbox: what it holds, why it sits in the oil and what it has to withstand.
- [Electro-hydraulic control unit](https://catalog.polo.blue/self-study/ssp-308-direct-shift-gearbox-dq250-02e/electro-hydraulic-control-unit/index.md): The solenoid valves and pressure control valves of the mechatronics and how they divide into selector and modulation valves.
- [Oil lubrication circuit](https://catalog.polo.blue/self-study/ssp-308-direct-shift-gearbox-dq250-02e/oil-lubrication-circuit/index.md): One oil for clutches, gears and hydraulics: the demands on it, the oil pump, the circuit diagram and its electro-hydraulic control.
- [Clutch cooling oil system](https://catalog.polo.blue/self-study/ssp-308-direct-shift-gearbox-dq250-02e/clutch-cooling-oil-system/index.md): The separate oil channel that cools the wet clutches and how sender G509 and valve N218 regulate the flow.
- [Gear selection](https://catalog.polo.blue/self-study/ssp-308-direct-shift-gearbox-dq250-02e/gear-selection/index.md): Selector forks moved by oil pressure in two cylinders, held by a locking mechanism and watched through a permanent magnet.
- [System overview](https://catalog.polo.blue/self-study/ssp-308-direct-shift-gearbox-dq250-02e/system-overview/index.md): All sensors and actuators of the gearbox on one diagram, with the mechatronics, the selector lever and the CAN bus.
- [Sensors](https://catalog.polo.blue/self-study/ssp-308-direct-shift-gearbox-dq250-02e/sensors/index.md): Speed, pressure, temperature and travel senders and the selector lever control unit: where they sit, what the signal does and what a failure causes.
- [Actuators](https://catalog.polo.blue/self-study/ssp-308-direct-shift-gearbox-dq250-02e/actuators/index.md): Pressure control valves N215 to N218, N233 and N371 and solenoid valves N88 to N92: their task and the effects of a failure.
- [Functional diagram](https://catalog.polo.blue/self-study/ssp-308-direct-shift-gearbox-dq250-02e/functional-diagram/index.md): The wiring of the gearbox on the example of the Touran, with the list of components.
- [CAN data bus connection](https://catalog.polo.blue/self-study/ssp-308-direct-shift-gearbox-dq250-02e/can-data-bus-connection/index.md): How the mechatronics joins the drive and comfort CAN data buses and which control units share them.
- [Diagnosis](https://catalog.polo.blue/self-study/ssp-308-direct-shift-gearbox-dq250-02e/diagnosis/index.md): Guided fault finding and guided functions on VAS 5051, with the sensors, actuators and mechatronics faults it tests.
- [Service](https://catalog.polo.blue/self-study/ssp-308-direct-shift-gearbox-dq250-02e/service/index.md): Special tool VAS 6252 for checking and filling the DSG oil.
- [Test yourself](https://catalog.polo.blue/self-study/ssp-308-direct-shift-gearbox-dq250-02e/test-yourself/index.md): Thirteen questions on the direct shift gearbox, its clutches, oil circuit, mechatronics and senders, with the answers.
