# 4.3 Removing and installing exhaust gas recirculation cooler – 1.6 TDI CR engine (EA189)

> Removing and installing EGR cooler, 1.6 TDI on the VW Polo 6R: 21 steps and 3 drawings.

- Web page: https://catalog.polo.blue/repair-manuals/engine-1-6-tdi-cr-ea189/26-exhaust-system/removing-installing-exhaust-gas-recirculation-cooler/
- Original document: https://cdn.polo.blue/files/16-tdi-cr-engine-cayacaybcayc-workshop-manual-2019.pdf
- 26 – Exhaust system, [1.6 TDI CR engine (EA189)](https://catalog.polo.blue/repair-manuals/engine-1-6-tdi-cr-ea189/index.md)
- Previous procedure: [4.2 Checking changeover for exhaust gas recirculation cooler](https://catalog.polo.blue/repair-manuals/engine-1-6-tdi-cr-ea189/26-exhaust-system/checking-exhaust-gas-recirculation-cooler-changeover/index.md)
- Next procedure: [4.4 Checking exhaust gas recirculation cooler for leaks](https://catalog.polo.blue/repair-manuals/engine-1-6-tdi-cr-ea189/26-exhaust-system/checking-exhaust-gas-recirculation-cooler-leaks/index.md)

[⇒ 4.3.2 Removing and installing exhaust gas recirculation cooler, Polo](https://catalog.polo.blue/repair-manuals/engine-1-6-tdi-cr-ea189/26-exhaust-system/removing-installing-exhaust-gas-recirculation-cooler/#t535-82)

## 4.3.2 Removing and installing exhaust gas recirculation cooler, Polo

![](https://catalog.polo.blue/manuals/vw-polo-engine-ea189-16-tdi-cr/e474271b541b7865.webp)

- Remove engine cover panel [⇒ 3 Engine cover panel](https://catalog.polo.blue/repair-manuals/engine-1-6-tdi-cr-ea189/10-removing-and-installing-engine/).
- Remove particulate filter [⇒ 2.2 Removing and installing particulate filter](https://catalog.polo.blue/repair-manuals/engine-1-6-tdi-cr-ea189/26-exhaust-system/removing-and-installing-particulate-filter/#t490-231).
- Drain coolant [⇒ 1.3 Draining and adding coolant](https://catalog.polo.blue/repair-manuals/engine-1-6-tdi-cr-ea189/19-cooling/draining-and-adding-coolant/#t267-554).

> **Note**
>
> As it is difficult to gain access to clip on suction hose, it is better to remove intake connecting pipe from turbocharger.

![](https://catalog.polo.blue/manuals/vw-polo-engine-ea189-16-tdi-cr/114ec997095c8705.webp)

- Remove crankcase breather hose -3-.
- Pull vacuum hose -2- off intake hose -1- and move to side. Unclip bracket.
- Completely undo bolt -4- (make sure bolt is captive).
- Unscrew bolt -2-, swing intake hose with intake connection to rear and pull off of turbocharger.

![](https://catalog.polo.blue/manuals/vw-polo-engine-ea189-16-tdi-cr/784149f150cfbcce.webp)

- Unscrew bolts -arrows-.
- Loosen hose clip -1- and remove pulsation damper -2-.
- Remove turbocharger support [⇒ 4.2.1 Removing and installing oil supply line, Polo](https://catalog.polo.blue/repair-manuals/engine-1-6-tdi-cr-ea189/17-lubrication/removing-and-installing-oil-supply-line/#t254-158).
- Release front left wheel housing liner at bottom.
- Unscrew bolts of coolant pipes on right [⇒ 3.2.4 Removing and installing right coolant pipes, Polo](https://catalog.polo.blue/repair-manuals/engine-1-6-tdi-cr-ea189/19-cooling/removing-and-installing-coolant-pipes/#t306-543).
- Remove coolant pipes from exhaust gas recirculation cooler.
- Collect escaping coolant with drip tray for workshop hoists - VAS 6208-.
- Catch leaking engine oil with used oil collection and extraction unit - V.A.G 1782-.
- Pull vacuum line off vacuum unit [⇒ Item 5 (4.1 Assembly overview - exhaust gas recirculation)](https://catalog.polo.blue/repair-manuals/engine-1-6-tdi-cr-ea189/26-exhaust-system/assembly-overview-exhaust-gas-recirculation/#t530-425).
- Disconnect electrical connector from exhaust gas recirculation valve - N18- electrical actuator for exhaust gas recirculation cooler.
- Clamp off coolant supply line and return lines using hose clips up to Ø 25 mm - 3094- at exhaust gas recirculation cooler [⇒ 4.1 Assembly overview - exhaust gas recirculation](https://catalog.polo.blue/repair-manuals/engine-1-6-tdi-cr-ea189/26-exhaust-system/assembly-overview-exhaust-gas-recirculation/#t530-237).
- Disconnect coolant supply line and return lines from exhaust gas recirculation cooler.
- Collect escaping coolant with drip tray for workshop hoists - VAS 6208-.
- Unscrew bolts [⇒ Item 12 (4.1 Assembly overview - exhaust gas recirculation)](https://catalog.polo.blue/repair-manuals/engine-1-6-tdi-cr-ea189/26-exhaust-system/assembly-overview-exhaust-gas-recirculation/#t531-82) and remove exhaust gas recirculation cooler.

**Installing**

- Specified torque [⇒ 4.1 Assembly overview - exhaust gas recirculation](https://catalog.polo.blue/repair-manuals/engine-1-6-tdi-cr-ea189/26-exhaust-system/assembly-overview-exhaust-gas-recirculation/#t530-237).

Install in reverse order of removal, observing the following.

> **Note**
>
> - Renew the seals, gaskets and self-locking nuts ⇒ Electronic Parts Catalogue (ETKA).
> - Checking engine oil level [⇒ 1.5.2 Checking engine oil level](https://catalog.polo.blue/repair-manuals/engine-1-6-tdi-cr-ea189/17-lubrication/engine-oil/#t236-82).
> - Add coolant [⇒ 1.3.2 Filling with coolant](https://catalog.polo.blue/repair-manuals/engine-1-6-tdi-cr-ea189/19-cooling/draining-and-adding-coolant/#t270-82).
> - Install particulate filter [⇒ 2.2 Removing and installing particulate filter](https://catalog.polo.blue/repair-manuals/engine-1-6-tdi-cr-ea189/26-exhaust-system/removing-and-installing-particulate-filter/#t490-231).
> - Secure all hose connections with the correct type of hose clips (same as original equipment) ⇒ Electronic parts catalogue (ETKA).
> - If particulate filter or pressure differential sender - G 505- is renewed, pressure differential sender - G 505- must be adapted using vehicle diagnostic tester as a matter of priority: Guided Functions; Adapting pressure differential sender - G 505-.
