# 3.1 Assembly overview – exhaust gas temperature regulation – 1.6 TDI CR engine (EA189)

> VW Polo 6R, step by step: exhaust gas temperature regulation – overview, 1.6 TDI – tightening torques and 2 drawings.

- Web page: https://catalog.polo.blue/repair-manuals/engine-1-6-tdi-cr-ea189/26-exhaust-system/assembly-overview-exhaust-gas-temperature-regulation/
- Original document: https://cdn.polo.blue/files/16-tdi-cr-engine-cayacaybcayc-workshop-manual-2019.pdf
- 26 – Exhaust system, [1.6 TDI CR engine (EA189)](https://catalog.polo.blue/repair-manuals/engine-1-6-tdi-cr-ea189/index.md)
- Previous procedure: [2.2 Removing and installing particulate filter](https://catalog.polo.blue/repair-manuals/engine-1-6-tdi-cr-ea189/26-exhaust-system/removing-and-installing-particulate-filter/index.md)
- Next procedure: [3.2 Removing and installing parts of exhaust gas temperature regulation](https://catalog.polo.blue/repair-manuals/engine-1-6-tdi-cr-ea189/26-exhaust-system/removing-and-installing-exhaust-gas-temperature-senders/index.md)

## 3.1.2 Assembly overview - exhaust gas temperature regulation, Polo (LHD)

![](https://catalog.polo.blue/manuals/vw-polo-engine-ea189-16-tdi-cr/63095985ff71908d.webp)

- **1** Turbocharger
- **2** Control cable
  - 45 Nm
- **3** Particulate filter
- **4** Nut
  - 9 Nm
- **5** Bracket
  - Bolted to diesel particulate filter
- **6** Hose
- **7** Bracket
  - For pressure differential sender - G505-.
  - Illustration does not show version installed in vehicle.
- **8** Pressure differential sender - G505-
  - Removing and installing [⇒ 5.6 Removing and installing pressure differential sender - G505-](https://catalog.polo.blue/repair-manuals/engine-1-6-tdi-cr-ea189/23-mixture-preparation-injection/removing-installing-pressure-differential-sender-g505/#t432-82)
- **9** Bracket
- **10** Bolt
  - 4.5 Nm
- **11** Bolt
  - 8 Nm
- **12** Exhaust gas temperature sender 3 - G495-
  - Removing and installing [⇒ 3.2.5 Removing and installing exhaust gas temperature sender 3 - G495-, Polo LHD vehicles](https://catalog.polo.blue/repair-manuals/engine-1-6-tdi-cr-ea189/26-exhaust-system/removing-and-installing-exhaust-gas-temperature-senders/#t525-585)
  - The thread of the exhaust gas temperature sender is coated and must not also be coated with high-temperature paste.
  - 45 Nm, observe procedure.
- **13** Lambda probe 1 before catalytic converter - GX10-
  - with lambda probe - G39- and lambda probe heater - Z19-
  - Removing and installing [⇒ 6.2 Removing and installing Lambda probe](https://catalog.polo.blue/repair-manuals/engine-1-6-tdi-cr-ea189/23-mixture-preparation-injection/lambda-probe/#t442-82)
- **14** Exhaust gas temperature sender 4 - G648-
  - Removing and installing [⇒ 3.2.4 Removing and installing exhaust gas temperature sender 4 - G648-, Polo LHD vehicles](https://catalog.polo.blue/repair-manuals/engine-1-6-tdi-cr-ea189/26-exhaust-system/removing-and-installing-exhaust-gas-temperature-senders/#t524-360) 
  - The thread of the exhaust gas temperature sender is coated and must not also be coated with hightemperature paste.
  - 60 Nm
- **15** Exhaust gas temperature sender 1 - G235-
  - Removing and installing [⇒ 3.2.1 Removing and installing exhaust gas temperature sender 1 - G235-](https://catalog.polo.blue/repair-manuals/engine-1-6-tdi-cr-ea189/26-exhaust-system/removing-and-installing-exhaust-gas-temperature-senders/#t519-308)
  - Coat thread with high-temperature paste ⇒ Electronic parts catalogue (ETKA).
  - 45 Nm, observe procedure [⇒ 3.2.1 Removing and installing exhaust gas temperature sender 1 - G235-](https://catalog.polo.blue/repair-manuals/engine-1-6-tdi-cr-ea189/26-exhaust-system/removing-and-installing-exhaust-gas-temperature-senders/#t519-308).

## 3.1.3 Assembly overview - exhaust gas temperature regulation, Polo (RHD)

![](https://catalog.polo.blue/manuals/vw-polo-engine-ea189-16-tdi-cr/0d354b36a1cdb01b.webp)

- **1** Catalytic converter
- **2** Lambda probe 1 before catalytic converter - GX10-
  - with lambda probe - G39- and lambda probe heater - Z19-
  - Removing and installing [⇒ 6.2 Removing and installing Lambda probe](https://catalog.polo.blue/repair-manuals/engine-1-6-tdi-cr-ea189/23-mixture-preparation-injection/lambda-probe/#t442-82)
- **3** Exhaust gas temperature sender 3 - G495-
  - Removing and installing [⇒ 3.2.6 Removing and installing exhaust gas temperature sender 3 - G 495-, Polo RHD vehicles](https://catalog.polo.blue/repair-manuals/engine-1-6-tdi-cr-ea189/26-exhaust-system/removing-and-installing-exhaust-gas-temperature-senders/#t527-401)
  - The thread of the exhaust gas temperature sender is coated and must not also be coated with high-temperature paste.
  - 45 Nm
- **4** Exhaust gas temperature sender 4 - G648-
  - Removing and installing [⇒ 3.2.7 Removing and installing exhaust gas temperature sender 4 - G 648-, Polo RHD vehicles](https://catalog.polo.blue/repair-manuals/engine-1-6-tdi-cr-ea189/26-exhaust-system/removing-and-installing-exhaust-gas-temperature-senders/#t528-258)
  - The thread of the exhaust gas temperature sender is coated and must not also be coated with high-temperature paste.
  - 60 Nm
- **5** Particulate filter
- **6** Exhaust gas temperature sender 1 - G235-
  - Removing and installing [⇒ 3.2.1 Removing and installing exhaust gas temperature sender 1 - G235-](https://catalog.polo.blue/repair-manuals/engine-1-6-tdi-cr-ea189/26-exhaust-system/removing-and-installing-exhaust-gas-temperature-senders/#t519-308)
  - Coat thread with high-temperature paste ⇒ Electronic parts catalogue (ETKA).
  - 45 Nm, observe procedure.
- **7** Turbocharger 

## Tightening torques on this page

### 3.1.2 Assembly overview - exhaust gas temperature regulation, Polo (LHD) [To the drawing](https://catalog.polo.blue/repair-manuals/engine-1-6-tdi-cr-ea189/26-exhaust-system/assembly-overview-exhaust-gas-temperature-regulation/#3-1-2-assembly-overview-exhaust-gas-temperature-regulation-p)
| Item | Part | Torque | Notes |
| --- | --- | --- | --- |
| 2 | Control cable | 45 Nm |  |
| 4 | Nut | 9 Nm |  |
| 10 | Bolt | 4.5 Nm |  |
| 11 | Bolt | 8 Nm |  |
| 12 | Exhaust gas temperature sender 3 - G495- | 45 Nm | The thread of the exhaust gas temperature sender is coated and must not also be coated with high-temperature paste. · observe procedure. |
| 14 | Exhaust gas temperature sender 4 - G648- | 60 Nm | The thread of the exhaust gas temperature sender is coated and must not also be coated with hightemperature paste. |
| 15 | Exhaust gas temperature sender 1 - G235- | 45 Nm |  |

### 3.1.3 Assembly overview - exhaust gas temperature regulation, Polo (RHD) [To the drawing](https://catalog.polo.blue/repair-manuals/engine-1-6-tdi-cr-ea189/26-exhaust-system/assembly-overview-exhaust-gas-temperature-regulation/#3-1-3-assembly-overview-exhaust-gas-temperature-regulation-p)
**All except 6:** The thread of the exhaust gas temperature sender is coated and must not also be coated with high-temperature paste.

| Item | Part | Torque | Notes |
| --- | --- | --- | --- |
| 3 | Exhaust gas temperature sender 3 - G495- | 45 Nm |  |
| 4 | Exhaust gas temperature sender 4 - G648- | 60 Nm |  |
| 6 | Exhaust gas temperature sender 1 - G235- | 45 Nm | observe procedure. |
