# 3.3 Testing jammed-open injectors – 1.6 TDI CR engine (EA189)

> Testing jammed-open injectors, 1.6 TDI on the VW Polo 6R: 7 steps, special tool VAS 6213 and 6 drawings.

- Web page: https://catalog.polo.blue/repair-manuals/engine-1-6-tdi-cr-ea189/23-mixture-preparation-injection/testing-jammed-open-injectors/
- Original document: https://cdn.polo.blue/files/16-tdi-cr-engine-cayacaybcayc-workshop-manual-2019.pdf
- 23 – Mixture preparation - injection, [1.6 TDI CR engine (EA189)](https://catalog.polo.blue/repair-manuals/engine-1-6-tdi-cr-ea189/index.md)
- Previous procedure: [3.2 Adapting correction values for injectors](https://catalog.polo.blue/repair-manuals/engine-1-6-tdi-cr-ea189/23-mixture-preparation-injection/adapting-correction-values-for-injectors/index.md)
- Next procedure: [3.4 Check pressure retention valve in fuel return line](https://catalog.polo.blue/repair-manuals/engine-1-6-tdi-cr-ea189/23-mixture-preparation-injection/check-pressure-retention-valve-in-fuel-return-line/index.md)

> **Note**
>
> - Leaky regulating valves in injectors may lead to irregular engine running or may prevent engine from starting.
> - To check regulating valves for soiling and related higher leakage, in addition to the "classical" return quantity measurement, checking with vacuum is also possible.
> - Observe instructions for working on fuel system [⇒ 3.1 Rules for cleanliness](https://catalog.polo.blue/repair-manuals/engine-1-6-tdi-cr-ea189/00-technical-data/rules-for-cleanliness/#t12-146).

Special tools and workshop equipment required

![](https://catalog.polo.blue/manuals/vw-polo-engine-ea189-16-tdi-cr/f46b6f532c402830.webp)

- Hand vacuum pump - VAS 6213-

![](https://catalog.polo.blue/manuals/vw-polo-engine-ea189-16-tdi-cr/5233b5c0b942feb6.webp)

- Make an -adapter- from a return line.

- Collect escaping fuel with a cleaning cloth.
- Open cleaned return line connection of injector to be tested using a small screwdriver and long-nosed pliers.

![](https://catalog.polo.blue/manuals/vw-polo-engine-ea189-16-tdi-cr/83b6bd9cbb90d0f1.webp)

Always renew clips.

![](https://catalog.polo.blue/manuals/vw-polo-engine-ea189-16-tdi-cr/1ee7af85e01df68a.webp)

- Pull off return line in direction of arrow.

> **Warning**
>
> - The fuel and the fuel lines in the fuel system can become very hot (danger of scalding)!
> - The fuel system is also under pressure! Before opening the system, place a cloth around the connection and reduce pressure by carefully loosening the connection!
> - Wear eye and hand protection when performing any type of repair work on the fuel system!

![](https://catalog.polo.blue/manuals/vw-polo-engine-ea189-16-tdi-cr/3bbebe1840dcb326.webp)

- Undo fuel high-pressure line -2-. To do this, only undo union nuts on high-pressure accumulator -1-.
- Connect clean, blown-out adapter to injector to be tested.

![](https://catalog.polo.blue/manuals/vw-polo-engine-ea189-16-tdi-cr/266ae0708ae6b158.webp)

- Use hand-operated vacuum pump - VAS 6213- to generate vacuum of approx. -500 mbar.

If injectors are OK, pressure remains constant for 30 seconds.

If injectors are defective, the pressure drops to 0 bar within 2 … 3 seconds.

Repeat check if necessary, observe pressure loss at hand-operated vacuum pump - VAS 6213-.

- Renew injectors [⇒ 3.5 Removing and installing injectors](https://catalog.polo.blue/repair-manuals/engine-1-6-tdi-cr-ea189/23-mixture-preparation-injection/removing-and-installing-injectors/#t403-309).
