# 8.3 Removing and installing throttle valve module J338 – 1.6 TDI CR engine (EA189)

> VW Polo 6R (Intake manifold), step by step: removing and installing throttle valve module J338, 1.6 TDI – 10 steps and 3 drawings.

- Web page: https://catalog.polo.blue/repair-manuals/engine-1-6-tdi-cr-ea189/23-mixture-preparation-injection/removing-and-installing-throttle-valve-module-j338/
- Original document: https://cdn.polo.blue/files/16-tdi-cr-engine-cayacaybcayc-workshop-manual-2019.pdf
- 23 – Mixture preparation - injection, [1.6 TDI CR engine (EA189)](https://catalog.polo.blue/repair-manuals/engine-1-6-tdi-cr-ea189/index.md)
- Previous procedure: [8.2 Removing and installing intake manifold](https://catalog.polo.blue/repair-manuals/engine-1-6-tdi-cr-ea189/23-mixture-preparation-injection/removing-and-installing-intake-manifold/index.md)
- Next procedure: [9.1 Removing and installing engine control unit](https://catalog.polo.blue/repair-manuals/engine-1-6-tdi-cr-ea189/23-mixture-preparation-injection/removing-and-installing-engine-control-unit/index.md)

**Removing**

- Remove engine cover panel [⇒ 3 Engine cover panel](https://catalog.polo.blue/repair-manuals/engine-1-6-tdi-cr-ea189/10-removing-and-installing-engine/).
- Remove noise insulation:
  Polo ⇒ General body repairs, exterior; Rep. gr. 50; Noise insulation; Assembly overview - noise insulation

![](https://catalog.polo.blue/manuals/vw-polo-engine-ea189-16-tdi-cr/815cc603f1db22b0.webp)

- Loosen hose clamps -1- and -2- and remove air hose.

![](https://catalog.polo.blue/manuals/vw-polo-engine-ea189-16-tdi-cr/8a428a452c974d6f.webp)

- Unscrew bolts -arrows-.
- Free off coolant hose -3-.
- Release hose clip -2-.
- Disconnect electrical connector -1- on charge pressure sender - G31- and remove air pipe.

![](https://catalog.polo.blue/manuals/vw-polo-engine-ea189-16-tdi-cr/c3313ffd37d575b9.webp)

- Disconnect connector -2-.
- Remove bolt -1- for dipstick guide tube.
- Unscrew bolts -arrows- and remove throttle valve module - J338-.

**Installing**

Install in reverse order, noting the following:

- Specified torque [⇒ Item 18 (8.1.2 Assembly overview - intake manifold with attachments, vehicles without intake manifold flap)](https://catalog.polo.blue/repair-manuals/engine-1-6-tdi-cr-ea189/23-mixture-preparation-injection/assembly-overview-intake-manifold/#t452-634)

> **Note**
>
> Renew O-ring.
