# 5.4 Checking fuel pressure sender G 247 – 1.6 TDI CR engine (EA189)

> Checking fuel pressure sender G247, 1.6 TDI (Senders and sensors) on the VW Polo 6R: 3 steps and 2 drawings.

- Web page: https://catalog.polo.blue/repair-manuals/engine-1-6-tdi-cr-ea189/23-mixture-preparation-injection/checking-fuel-pressure-sender-g-247/
- Original document: https://cdn.polo.blue/files/16-tdi-cr-engine-cayacaybcayc-workshop-manual-2019.pdf
- 23 – Mixture preparation - injection, [1.6 TDI CR engine (EA189)](https://catalog.polo.blue/repair-manuals/engine-1-6-tdi-cr-ea189/index.md)
- Previous procedure: [5.3 Removing and installing fuel pressure sender G 247](https://catalog.polo.blue/repair-manuals/engine-1-6-tdi-cr-ea189/23-mixture-preparation-injection/removing-and-installing-fuel-pressure-sender-g-247/index.md)
- Next procedure: [5.5 Checking fuel metering valve N 290](https://catalog.polo.blue/repair-manuals/engine-1-6-tdi-cr-ea189/23-mixture-preparation-injection/checking-fuel-metering-valve-n-290/index.md)

[⇒ 2 Safety information](https://catalog.polo.blue/repair-manuals/engine-1-6-tdi-cr-ea189/00-technical-data/)

[⇒ 3.1 Rules for cleanliness](https://catalog.polo.blue/repair-manuals/engine-1-6-tdi-cr-ea189/00-technical-data/rules-for-cleanliness/#t12-146)

- Remove engine cover panel [⇒ 3 Engine cover panel](https://catalog.polo.blue/repair-manuals/engine-1-6-tdi-cr-ea189/10-removing-and-installing-engine/).

![](https://catalog.polo.blue/manuals/vw-polo-engine-ea189-16-tdi-cr/451f5544e5a4540e.webp)

> **Note**
>
> - Fuel pressure sender - G 247- -1- is located in fuel rail. It measures the current fuel pressure in the high-pressure system and transmits a voltage signal to the engine control unit - J623-.
> - If engine cannot be started though it can be with the connector removed, fuel pressure sender - G 247- is defective.
> - With connector removed, a substitute value is taken from control unit for starting. If engine start is not possible with connector removed, the problem is not on fuel pressure sender - G 247-.
> - In the event of sender failure, pressure regulation is controlled using a map from the engine control unit.
> - In back-up function, the maximum engine speed is limited to approx. 3000 rpm.

![](https://catalog.polo.blue/manuals/vw-polo-engine-ea189-16-tdi-cr/e4f0dfa01f243397.webp)

- Separate electrical connector -1- on fuel pressure sender - G 247-.
- Perform check as described.

- Perform electrical checks on fuel pressure sender - G 247- using »Guided Fault Finding«.
