# 5.2 Checking fuel pressure regulating valve N276 – 1.6 TDI CR engine (EA189)

> VW Polo 6R (Senders and sensors), step by step: checking fuel pressure regulating valve N276, 1.6 TDI – 6 steps and 3 drawings.

- Web page: https://catalog.polo.blue/repair-manuals/engine-1-6-tdi-cr-ea189/23-mixture-preparation-injection/checking-fuel-pressure-regulating-valve-n276/
- Original document: https://cdn.polo.blue/files/16-tdi-cr-engine-cayacaybcayc-workshop-manual-2019.pdf
- 23 – Mixture preparation - injection, [1.6 TDI CR engine (EA189)](https://catalog.polo.blue/repair-manuals/engine-1-6-tdi-cr-ea189/index.md)
- Previous procedure: [5.1 Removing and installing fuel pressure regulating valve N 276](https://catalog.polo.blue/repair-manuals/engine-1-6-tdi-cr-ea189/23-mixture-preparation-injection/removing-installing-fuel-pressure-regulating-valve-n276/index.md)
- Next procedure: [5.3 Removing and installing fuel pressure sender G 247](https://catalog.polo.blue/repair-manuals/engine-1-6-tdi-cr-ea189/23-mixture-preparation-injection/removing-and-installing-fuel-pressure-sender-g-247/index.md)

[⇒ 2 Safety information](https://catalog.polo.blue/repair-manuals/engine-1-6-tdi-cr-ea189/00-technical-data/)

[⇒ 3.1 Rules for cleanliness](https://catalog.polo.blue/repair-manuals/engine-1-6-tdi-cr-ea189/00-technical-data/rules-for-cleanliness/#t12-146)

- Engine at operating temperature.
- Air conditioner switched off

> **Note**
>
> - A fuel pressure regulating valve - N 276- leaking during starting will result in an increased return flow rate.
> - The fuel high-pressure required for starting will not be achieved.

- Remove engine cover panel [⇒ 3 Engine cover panel](https://catalog.polo.blue/repair-manuals/engine-1-6-tdi-cr-ea189/10-removing-and-installing-engine/).

![](https://catalog.polo.blue/manuals/vw-polo-engine-ea189-16-tdi-cr/14a6b236d29b37ca.webp)

- Pull off fuel return line -2-.

![](https://catalog.polo.blue/manuals/vw-polo-engine-ea189-16-tdi-cr/5e89584f17862f9f.webp)

- Seal open fuel return line connection with a blanking plug -1-.
- Connect fuel return line -2- to suitable hose -3-.

![](https://catalog.polo.blue/manuals/vw-polo-engine-ea189-16-tdi-cr/d2099a5bd5a3e5ec.webp)

- Hold the end of this hose -1- in a suitable container -2- to measure the return flow rate.

1. Check with engine running

- Start engine and run at idling speed.

- Specified amount in 30 seconds: ≥75 ml

If the specification is not attained, the fuel pressure regulating valve - N 276- is defective.

2. Check with engine running

If condition in 1) is met, increase engine speed ≥ 2000 revs/min.

- Specification: return volume 0 ml
- Droplets are allowed
- If the specification is not attained, the fuel pressure regulating valve - N 276- is defective.

3. If it is no longer possible to start engine

Carry out check with starting speed.

- Specification: return volume 0 ml
- Droplets are allowed
- If the specification is not attained, the fuel pressure regulating valve - N 276- is defective.
