# 3.4 Check pressure retention valve in fuel return line – 1.6 TDI CR engine (EA189)

> VW Polo 6R, step by step: check pressure retention valve in fuel return line, 1.6 TDI – 8 steps, special tool VAS 6330 and 3 drawings.

- Web page: https://catalog.polo.blue/repair-manuals/engine-1-6-tdi-cr-ea189/23-mixture-preparation-injection/check-pressure-retention-valve-in-fuel-return-line/
- Original document: https://cdn.polo.blue/files/16-tdi-cr-engine-cayacaybcayc-workshop-manual-2019.pdf
- 23 – Mixture preparation - injection, [1.6 TDI CR engine (EA189)](https://catalog.polo.blue/repair-manuals/engine-1-6-tdi-cr-ea189/index.md)
- Previous procedure: [3.3 Testing jammed-open injectors](https://catalog.polo.blue/repair-manuals/engine-1-6-tdi-cr-ea189/23-mixture-preparation-injection/testing-jammed-open-injectors/index.md)
- Next procedure: [3.5 Removing and installing injectors](https://catalog.polo.blue/repair-manuals/engine-1-6-tdi-cr-ea189/23-mixture-preparation-injection/removing-and-installing-injectors/index.md)

The pressure retention valve has the task of maintaining a residual pressure (control volume) of approx. 1 bar in the return lines.

This residual pressure is required for the control function of the injectors.

Special tools and workshop equipment required 

![](https://catalog.polo.blue/manuals/vw-polo-engine-ea189-16-tdi-cr/205af01fcfb5f3f9.webp)

- Pressure gauge - VAS 6330-
- Adapter - VAS 6330/3-1-
- Adapter - VAS 6330/3-2-

- Remove engine cover panel [⇒ 3 Engine cover panel](https://catalog.polo.blue/repair-manuals/engine-1-6-tdi-cr-ea189/10-removing-and-installing-engine/).
- Clean return line connection on cylinder 1 (e.g. with cold cleaner) before removing.
- Dry return line connection on No. 1 cylinder.
- Cover return line connection on No. 1 cylinder with a cleaning cloth.
- Pull return line connection off No. 1 cylinder; pull out release clip to do this.

![](https://catalog.polo.blue/manuals/vw-polo-engine-ea189-16-tdi-cr/83b6bd9cbb90d0f1.webp)

> **Note**
>
> - Open the return line connection with a narrow screwdriver and long-nosed pliers.
> - Adhere strictly to rules of cleanliness. No dirt must be allowed to enter the disconnected fuel return lines or the open connections on the injectors.
> - Always renew clips.

![](https://catalog.polo.blue/manuals/vw-polo-engine-ea189-16-tdi-cr/7e04d3601219de4e.webp)

- Install tester for fuel return system - 6330- with adapters -VAS 6330/3-1- and -VAS 6330/3-2- between return line connection on injector and return line.
- Start engine.
- Check pressure on pressure gauge.

- Specification: approx. 1.0 bar

If the value does not match the specification, fit a new pressure retention valve.

After any work on the fuel system

- Observe instructions for working on fuel system [⇒ 3.1 Rules for cleanliness](https://catalog.polo.blue/repair-manuals/engine-1-6-tdi-cr-ea189/00-technical-data/rules-for-cleanliness/#t12-146).
