# 4.1 Assembly overview – high-pressure pump – 1.6 TDI CR engine (EA189)

> High-pressure pump – assembly overview, 1.6 TDI on the VW Polo 6R: tightening torques and 1 drawing.

- Web page: https://catalog.polo.blue/repair-manuals/engine-1-6-tdi-cr-ea189/23-mixture-preparation-injection/assembly-overview-high-pressure-pump/
- Original document: https://cdn.polo.blue/files/16-tdi-cr-engine-cayacaybcayc-workshop-manual-2019.pdf
- 23 – Mixture preparation - injection, [1.6 TDI CR engine (EA189)](https://catalog.polo.blue/repair-manuals/engine-1-6-tdi-cr-ea189/index.md)
- Previous procedure: [3.7 Removing and installing high-pressure lines](https://catalog.polo.blue/repair-manuals/engine-1-6-tdi-cr-ea189/23-mixture-preparation-injection/removing-and-installing-high-pressure-lines/index.md)
- Next procedure: [4.2 Removing and installing high-pressure pump](https://catalog.polo.blue/repair-manuals/engine-1-6-tdi-cr-ea189/23-mixture-preparation-injection/removing-and-installing-high-pressure-pump/index.md)

![](https://catalog.polo.blue/manuals/vw-polo-engine-ea189-16-tdi-cr/2d635d3be7d9403c.webp)

- **1** Ancillary bracket
  - Removing and installing [⇒ 1.5 Removing and installing bracket for ancillaries](https://catalog.polo.blue/repair-manuals/engine-1-6-tdi-cr-ea189/13-crankshaft-group/removing-and-installing-bracket-for-ancillaries/#t95-82)
- **2** Bolt
  - Qty. 2
  - Renew
  - 20 Nm +180°
- **3** Hub
  - Use counterhold - T10051- to loosen and tighten.
  - To remove, use puller - T40064-.
- **4** High-pressure pump toothed belt pulley
- **5** Bolt
  - Renew
  - Qty. 3
  - 20 Nm
- **6** Nut
  - 95 Nm
- **7** Bolt
  - Renew
  - 20 Nm +45°
- **8** High-pressure pump

> **Caution**
>
> Danger of functional impairment due to contamination/soiling

[⇒ 3.1 Rules for cleanliness](https://catalog.polo.blue/repair-manuals/engine-1-6-tdi-cr-ea189/00-technical-data/rules-for-cleanliness/#t12-146)

Risk of irreparable damage to high-pressure pump if allowed to run while empty After the high-pressure

pump has been installed, it must be filled with fuel before engine is started [⇒ 1.3 Filling/bleeding fuel system](https://catalog.polo.blue/repair-manuals/engine-1-6-tdi-cr-ea189/23-mixture-preparation-injection/filling-bleeding-fuel-system/#t392-82).

- With fuel metering valve - N290- (do not open) 
- After high-pressure pump or fuel pressure regulating valve - N276- is renewed, learned values have to be re-adapted, see “Guided Functions” in vehicle diagnostic tester.
- Removing and installing

- **9** High-pressure line
  - Between high-pressure pump and fuel rail
  - Do not alter shape.
  - Check for damage before re-installing.
  - When renewing high-pressure pump, also renew high-pressure line.
  - Removing and installing [⇒ 3.7 Removing and installing high-pressure lines](https://catalog.polo.blue/repair-manuals/engine-1-6-tdi-cr-ea189/23-mixture-preparation-injection/removing-and-installing-high-pressure-lines/#t412-380)
  - Lubricate thread of union nuts with clean engine oil
  - 28 Nm
- **10** Fuel supply hose
- **11** Fuel return hose

## Tightening torques on this page

### Torque [To the drawing](https://catalog.polo.blue/repair-manuals/engine-1-6-tdi-cr-ea189/23-mixture-preparation-injection/assembly-overview-high-pressure-pump/#t419-180)
**All except 6, 9:** Renew

| Item | Part | Torque | Notes |
| --- | --- | --- | --- |
| 2 | Bolt | 20 Nm +180° | Qty. 2 |
| 5 | Bolt | 20 Nm | Qty. 3 |
| 6 | Nut | 95 Nm |  |
| 7 | Bolt | 20 Nm +45° |  |
| 9 | High-pressure line | 28 Nm | Between high-pressure pump and fuel rail · Do not alter shape. · Check for damage before re-installing. · When renewing high-pressure pump, also renew high-pressure line. · Lubricate thread of union nuts with clean engine oil |
