# 7.1 Assembly overview – air filter housing – 1.6 TDI CR engine (EA189)

> Air filter housing – assembly overview, 1.6 TDI on the VW Polo 6R: tightening torques and 1 drawing.

- Web page: https://catalog.polo.blue/repair-manuals/engine-1-6-tdi-cr-ea189/23-mixture-preparation-injection/assembly-overview-air-filter-housing/
- Original document: https://cdn.polo.blue/files/16-tdi-cr-engine-cayacaybcayc-workshop-manual-2019.pdf
- 23 – Mixture preparation - injection, [1.6 TDI CR engine (EA189)](https://catalog.polo.blue/repair-manuals/engine-1-6-tdi-cr-ea189/index.md)
- Previous procedure: [6 Lambda probe](https://catalog.polo.blue/repair-manuals/engine-1-6-tdi-cr-ea189/23-mixture-preparation-injection/lambda-probe/index.md)
- Next procedure: [7.2 Removing and installing air filter housing](https://catalog.polo.blue/repair-manuals/engine-1-6-tdi-cr-ea189/23-mixture-preparation-injection/removing-and-installing-air-filter-housing/index.md)

[⇒ 7.1.2 Assembly overview - air filter housing, Polo](https://catalog.polo.blue/repair-manuals/engine-1-6-tdi-cr-ea189/23-mixture-preparation-injection/assembly-overview-air-filter-housing/#t446-118)

## 7.1.2 Assembly overview - air filter housing, Polo

![](https://catalog.polo.blue/manuals/vw-polo-engine-ea189-16-tdi-cr/903ca81ce91dbf02.webp)

- **1** Bolt
  - 2 Nm
- **2** Air mass meter - G70-
- **3** Flow conditioner
- **4** O-ring
  - Renew if damaged
- **5** Bolt
  - 2 Nm
- **6** Air filter upper part
- **7** Bolt
  - 8 Nm
- **8** Hot air intake B
  - Depending on equipment
- **9** Grommet
- **10** Bolt
  - 2 Nm
- **11** Air filter lower part
- **12** Rubber mounting
  - Renew if damaged
- **13** Intake connecting pipe
  - Bolted to lock carrier.
- **14** Air intake hose
  - Intake connecting pipe
- **15** Water drainage pipe
  - Observe installation position
- **16** Intake connecting pipe
  - With captive bolt, 9 Nm
- **17** Spring-type clip
- **18** Rubber mounting
  - Renew if damaged
- **19** Filter element
  - To remove, turn ¹/4 turns anti-clockwise
- **20** Suction hose
  - To turbocharger
  - With heater for crankcase breather system for vehicles in cold climate zones
- **21** Spring-type clip
- **22** Connecting pipe
  - From cylinder head cover
  - For crankcase breather 
- **23** Hose
  - For hot air intake.
  - Depending on equipment

## Tightening torques on this page

### 7.1.2 Assembly overview - air filter housing, Polo [To the drawing](https://catalog.polo.blue/repair-manuals/engine-1-6-tdi-cr-ea189/23-mixture-preparation-injection/assembly-overview-air-filter-housing/#7-1-2-assembly-overview-air-filter-housing-polo)
| Item | Part | Torque | Notes |
| --- | --- | --- | --- |
| 1 | Bolt | 2 Nm |  |
| 5 | Bolt | 2 Nm |  |
| 7 | Bolt | 8 Nm |  |
| 10 | Bolt | 2 Nm |  |
| 16 | Intake connecting pipe | 9 Nm | With captive bolt |
