# 1.1 Assembly overview – turbocharger – 1.6 TDI CR engine (EA189)

> Turbocharger – assembly overview, 1.6 TDI on the VW Polo 6R: tightening torques and 3 drawings.

- Web page: https://catalog.polo.blue/repair-manuals/engine-1-6-tdi-cr-ea189/21-turbocharging-supercharging/assembly-overview-turbocharger/
- Original document: https://cdn.polo.blue/files/16-tdi-cr-engine-cayacaybcayc-workshop-manual-2019.pdf
- 21 – Turbocharging/supercharging, [1.6 TDI CR engine (EA189)](https://catalog.polo.blue/repair-manuals/engine-1-6-tdi-cr-ea189/index.md)
- Previous procedure: [4.3 Removing and installing radiator cowl with radiator fan](https://catalog.polo.blue/repair-manuals/engine-1-6-tdi-cr-ea189/19-cooling/removing-installing-radiator-cowl-radiator-fan/index.md)
- Next procedure: [1.2 Removing and installing turbocharger](https://catalog.polo.blue/repair-manuals/engine-1-6-tdi-cr-ea189/21-turbocharging-supercharging/removing-and-installing-turbocharger/index.md)

[⇒ 1.1.2 Assembly overview - turbocharger, Polo](https://catalog.polo.blue/repair-manuals/engine-1-6-tdi-cr-ea189/21-turbocharging-supercharging/assembly-overview-turbocharger/#t327-528)

## 1.1.2 Assembly overview - turbocharger, Polo

[⇒ 2 Safety information](https://catalog.polo.blue/repair-manuals/engine-1-6-tdi-cr-ea189/00-technical-data/)

[⇒ 3.1 Rules for cleanliness](https://catalog.polo.blue/repair-manuals/engine-1-6-tdi-cr-ea189/00-technical-data/rules-for-cleanliness/#t12-146)

> **Note**
>
> - All hose connections are secured.
> - Charge air system must be free of leaks.
> - Renew self-locking nuts.
> - Before screwing on oil supply line, fill turbocharger at connection with engine oil.
> - After installing turbocharger, run engine for about 1 minute at idling speed to ensure that oil is supplied to turbocharger.

![](https://catalog.polo.blue/manuals/vw-polo-engine-ea189-16-tdi-cr/00caa0ed948ffa32.webp)

- **1** Turbocharger
  - Only renew together with exhaust manifold
  - Removing and installing [⇒ 1.2 Removing and installing turbocharger](https://catalog.polo.blue/repair-manuals/engine-1-6-tdi-cr-ea189/21-turbocharging-supercharging/removing-and-installing-turbocharger/#t330-82)
- **2** Pressure canister
  - With position sender for charge pressure positioner - G581-
  - Renewing [⇒ 1.3 Renewing vacuum unit for turbocharger](https://catalog.polo.blue/repair-manuals/engine-1-6-tdi-cr-ea189/21-turbocharging-supercharging/renewing-vacuum-unit-for-turbocharger/#t353-307)
- **3** Connector
  - To position sender for charge pressure positioner - G581-
- **4** Heat protection
  - Renew if damaged
- **5** Seal
  - Renew
- **6** 14 Nm
- **7** Connecting pipe
  - To exhaust gas recirculation cooler
- **8** Exhaust gas temperature sender 1 - G 235-
  - 45 Nm
  - Removing and installing [⇒ 3.2 Removing and installing parts of exhaust gas temperature regulation](https://catalog.polo.blue/repair-manuals/engine-1-6-tdi-cr-ea189/26-exhaust-system/removing-and-installing-exhaust-gas-temperature-senders/#t519-82)
- **9** 10 Nm
- **10** Bracket
- **11** Heat shield
- **12** 10 Nm
- **13** Turbocharger support
  - Removing and installing [⇒ 4.2 Removing and installing oil supply line](https://catalog.polo.blue/repair-manuals/engine-1-6-tdi-cr-ea189/17-lubrication/removing-and-installing-oil-supply-line/#t254-82)
  - Before installing oil supply line, ensure that it is not blocked.
  - Before installing, fill turbocharger with engine oil through oil supply line connection.
- **14** O-ring
  - Renew with banjo bolt.
- **15** Banjo bolt, 60 Nm
  - Renew complete with O-rings.
- **16** Oil return pipe
- **17** Ribbed bolt
  - Renew
  - 14 Nm
- **18** Banjo bolt, 30 Nm
  - Renew complete with oil seals.
- **19** Seal
  - Renew 
- **20** Oil supply line
  - Removing and installing, Polo [⇒ 4.2 Removing and installing oil supply line](https://catalog.polo.blue/repair-manuals/engine-1-6-tdi-cr-ea189/17-lubrication/removing-and-installing-oil-supply-line/#t254-82).
  - Before installing oil supply line, ensure that it is not blocked.
- **21** Pulsation damper
- **22** 9 Nm

Installation position of O-ring and seals in pulsation damper

![](https://catalog.polo.blue/manuals/vw-polo-engine-ea189-16-tdi-cr/57c9a151d8955ff0.webp)

![](https://catalog.polo.blue/manuals/vw-polo-engine-ea189-16-tdi-cr/ffcd2751ba76b8f0.webp)

- **1** Damper
  - With grooves
- **2** O-ring
- **3** Seal
  - With spring

Installation position of exhaust gas temperature sender with angled cable guide

> **Note**
>
> When installing the exhaust temperature sender with angled cable guide, adhere to dimension -a- of 3 … 5 mm from the turbocharger support threaded connection.

## Tightening torques on this page

### 1.1.2 Assembly overview - turbocharger, Polo [To the drawing](https://catalog.polo.blue/repair-manuals/engine-1-6-tdi-cr-ea189/21-turbocharging-supercharging/assembly-overview-turbocharger/#1-1-2-assembly-overview-turbocharger-polo)
| Item | Part | Torque | Notes |
| --- | --- | --- | --- |
| 6 |  | 14 Nm |  |
| 8 | Exhaust gas temperature sender 1 - G 235- | 45 Nm |  |
| 9 |  | 10 Nm |  |
| 12 |  | 10 Nm |  |
| 15 | Banjo bolt | 60 Nm | Renew complete with O-rings. |
| 17 | Ribbed bolt | 14 Nm | Renew |
| 18 | Banjo bolt | 30 Nm | Renew complete with oil seals. |
| 22 |  | 9 Nm |  |
