# 4.2 Removing and installing radiator – 1.6 TDI CR engine (EA189)

> Removing and installing radiator, 1.6 TDI (Radiator, radiator fan) on the VW Polo 6R: 18 steps. Danger of damage to coolant lines and hoses.

- Web page: https://catalog.polo.blue/repair-manuals/engine-1-6-tdi-cr-ea189/19-cooling/removing-and-installing-radiator/
- Original document: https://cdn.polo.blue/files/16-tdi-cr-engine-cayacaybcayc-workshop-manual-2019.pdf
- 19 – Cooling, [1.6 TDI CR engine (EA189)](https://catalog.polo.blue/repair-manuals/engine-1-6-tdi-cr-ea189/index.md)
- Previous procedure: [4.1 Assembly overview – radiator/radiator fan](https://catalog.polo.blue/repair-manuals/engine-1-6-tdi-cr-ea189/19-cooling/assembly-overview-radiator-radiator-fan/index.md)
- Next procedure: [4.3 Removing and installing radiator cowl with radiator fan](https://catalog.polo.blue/repair-manuals/engine-1-6-tdi-cr-ea189/19-cooling/removing-installing-radiator-cowl-radiator-fan/index.md)

[⇒ 4.2.2 Removing and installing radiator, Polo](https://catalog.polo.blue/repair-manuals/engine-1-6-tdi-cr-ea189/19-cooling/removing-and-installing-radiator/#t316-727)

## 4.2.2 Removing and installing radiator, Polo

![](https://catalog.polo.blue/manuals/vw-polo-engine-ea189-16-tdi-cr/fcda45e79cd81638.webp)

Special tools and workshop equipment required

- Refractometer - T10007-
- Drip tray for workshop hoist - VAS 6208-
- Torque wrench - V.A.G 1331/-
- Pliers for spring-type clips - VAS 6362-
- Guide pins - 3411-

**Removing**

- Set lock carrier to service position ⇒ General body repairs, exterior; Rep. gr. 50; Lock carrier; Moving to and back from service position.
- Remove connecting hoses to charge air cooler [⇒ 2.1.3 Assembly overview - charge air system, Polo](https://catalog.polo.blue/repair-manuals/engine-1-6-tdi-cr-ea189/21-turbocharging-supercharging/assembly-overview-charge-air-system/#t364-82).

![](https://catalog.polo.blue/manuals/vw-polo-engine-ea189-16-tdi-cr/33431b4839ff8446.webp)

- To do this, loosen hose clamps on »hot side« of connecting hoses.

![](https://catalog.polo.blue/manuals/vw-polo-engine-ea189-16-tdi-cr/99d04bdfd22b5844.webp)

- Do do this, loosen hose clamps on »cold side« of connecting hoses.
- Separate connector for radiator fan.

![](https://catalog.polo.blue/manuals/vw-polo-engine-ea189-16-tdi-cr/fd45d77055998651.webp)

- Remove coolant hoses from radiator at top left, releasing clips -1 and 2- to do so.
- Drain coolant [⇒ 1.3 Draining and adding coolant](https://catalog.polo.blue/repair-manuals/engine-1-6-tdi-cr-ea189/19-cooling/draining-and-adding-coolant/#t267-554).

![](https://catalog.polo.blue/manuals/vw-polo-engine-ea189-16-tdi-cr/4ca21782a0120a8f.webp)

- Disengage fasteners, remove air ducts -1, 2-.

![](https://catalog.polo.blue/manuals/vw-polo-engine-ea189-16-tdi-cr/9c95bb2d0415ae02.webp)

- Unscrew bolts -arrows-.
- Tilt top of radiator slightly backwards.
- Raise radiator, disengage from lower mounting points and push backwards.

![](https://catalog.polo.blue/manuals/vw-polo-engine-ea189-16-tdi-cr/bc0a61d65311936d.webp)

Vehicles with air conditioning system

> **Warning**
>
> Danger of injury due to coolant.
>
> - Do not open the air conditioner refrigerant circuit.

- Unscrew bolts -arrows-.

> **Caution**
>
> Danger of damage to coolant lines and hoses.
>
> - Do NOT stretch, kink or bend refrigerant lines and hoses.

- Place condenser in bonnet lock latch at front and secure with cable ties to prevent it from falling.

**Continued for all vehicles**

Disconnecting charge air cooler from radiator

> **Caution**
>
> In order to avoid damage to charge air cooler, 2 mechanics should be used to disconnect charge air cooler from radiator.

![](https://catalog.polo.blue/manuals/vw-polo-engine-ea189-16-tdi-cr/688b196144bae1d3.webp)

- Push a wide screwdriver into the latch on the left. Turn the screwdriver in order to carefully open the latch of the charge air cooler -1- at radiator.
- Then, pull the charge air cooler on left downwards a little bit.

![](https://catalog.polo.blue/manuals/vw-polo-engine-ea189-16-tdi-cr/2f99abe105a6496b.webp)

- Push charge air cooler -1- towards the right out of the locking latch of the radiator -2-.

**Installing**

Installation is carried out in the reverse order. When installing, note the following:

- Add coolant [⇒ 1.3.2 Filling with coolant](https://catalog.polo.blue/repair-manuals/engine-1-6-tdi-cr-ea189/19-cooling/draining-and-adding-coolant/#t270-82).
- Vehicles with air conditioner. Fill air conditioning system with refrigerant ⇒ Air conditioning systems with refrigerant R134a; Rep. gr. 00; Working with air conditioner service station; Filling refrigerant circuit using air conditioner service station.
