# 2.2 Removing and installing coolant pump – 1.6 TDI CR engine (EA189)

> Removing and installing coolant pump, 1.6 TDI on the VW Polo 6R: 10 steps, special tools T10007, VAS 6208 and VAS 6362, tightening torques and 3 drawings.

- Web page: https://catalog.polo.blue/repair-manuals/engine-1-6-tdi-cr-ea189/19-cooling/removing-and-installing-coolant-pump/
- Original document: https://cdn.polo.blue/files/16-tdi-cr-engine-cayacaybcayc-workshop-manual-2019.pdf
- 19 – Cooling, [1.6 TDI CR engine (EA189)](https://catalog.polo.blue/repair-manuals/engine-1-6-tdi-cr-ea189/index.md)
- Previous procedure: [2.1 Assembly overview – coolant pump, thermostat](https://catalog.polo.blue/repair-manuals/engine-1-6-tdi-cr-ea189/19-cooling/assembly-overview-coolant-pump-thermostat/index.md)
- Next procedure: [2.3 Removing and installing thermostat](https://catalog.polo.blue/repair-manuals/engine-1-6-tdi-cr-ea189/19-cooling/removing-and-installing-thermostat/index.md)

![](https://catalog.polo.blue/manuals/vw-polo-engine-ea189-16-tdi-cr/72c57910c7634500.webp)

Special tools and workshop equipment required

- Refractometer - T10007-
- Drip tray for workshop hoist - VAS 6208-
- Torque wrench (5 … 50 Nm) - V.A.G 1331-
- Pliers for spring-type clips - VAS 6362-

**Removing**

> **Note**
>
> Renew gaskets and seals.

- Drain coolant [⇒ 1.3 Draining and adding coolant](https://catalog.polo.blue/repair-manuals/engine-1-6-tdi-cr-ea189/19-cooling/draining-and-adding-coolant/#t267-554).
- Remove poly V-belt [⇒ 13 – Crankshaft group](https://catalog.polo.blue/repair-manuals/engine-1-6-tdi-cr-ea189/13-crankshaft-group/).
- Remove toothed belt [⇒ 2.2 Removing and installing toothed belt](https://catalog.polo.blue/repair-manuals/engine-1-6-tdi-cr-ea189/15-cylinder-head-valve-gear/removing-and-installing-toothed-belt/#t190-82).

Vehicles with supplementary or auxiliary heating

- Remove coolant pipes on right 

**Continued for all vehicles**

![](https://catalog.polo.blue/manuals/vw-polo-engine-ea189-16-tdi-cr/8535144505f60c55.webp)

- Remove securing bolts -1- for coolant pump -2- and carefully remove coolant pump.

**Installing**

Installation is carried out in the reverse order. When installing, note the following:

![](https://catalog.polo.blue/manuals/vw-polo-engine-ea189-16-tdi-cr/9d24349bdb372d0b.webp)

- Moisten new O-ring -3- with coolant.
- Insert coolant pump -2- in cylinder block, and tighten securing bolts -1- to 15 Nm.

> **Note**
>
> The coolant pump plug faces downwards.

- Install toothed belt [⇒ 2.2 Removing and installing toothed belt](https://catalog.polo.blue/repair-manuals/engine-1-6-tdi-cr-ea189/15-cylinder-head-valve-gear/removing-and-installing-toothed-belt/#t190-82).
- Install poly V-belt [⇒ 13 – Crankshaft group](https://catalog.polo.blue/repair-manuals/engine-1-6-tdi-cr-ea189/13-crankshaft-group/).
- Add coolant [⇒ 1.3.2 Filling with coolant](https://catalog.polo.blue/repair-manuals/engine-1-6-tdi-cr-ea189/19-cooling/draining-and-adding-coolant/#t270-82).

## Tightening torques on this page

### In the steps
| Step | Torque |
| --- | --- |
| Torque wrench (5 … 50 Nm) - V.A.G 1331- | 50 Nm |
| Insert coolant pump -2- in cylinder block, and tighten securing bolts -1- to 15 Nm. | 15 Nm |
