# 1.2 Checking cooling system for leaks – 1.6 TDI CR engine (EA189)

> Checking cooling system for leaks, 1.6 TDI (Cooling system/coolant) on the VW Polo 6R: 10 steps, special tool V.A.G 1274/8 and 6 drawings.

- Web page: https://catalog.polo.blue/repair-manuals/engine-1-6-tdi-cr-ea189/19-cooling/checking-cooling-system-for-leaks/
- Original document: https://cdn.polo.blue/files/16-tdi-cr-engine-cayacaybcayc-workshop-manual-2019.pdf
- 19 – Cooling, [1.6 TDI CR engine (EA189)](https://catalog.polo.blue/repair-manuals/engine-1-6-tdi-cr-ea189/index.md)
- Previous procedure: [1.1 Coolant hose connection diagram](https://catalog.polo.blue/repair-manuals/engine-1-6-tdi-cr-ea189/19-cooling/coolant-hose-connection-diagram/index.md)
- Next procedure: [1.3 Draining and adding coolant](https://catalog.polo.blue/repair-manuals/engine-1-6-tdi-cr-ea189/19-cooling/draining-and-adding-coolant/index.md)

![](https://catalog.polo.blue/manuals/vw-polo-engine-ea189-16-tdi-cr/a885b82cfa2de05b.webp)

Special tools and workshop equipment required

- Adapter for cooling system tester - V.A.G 1274/8-
- Adapter for cooling system tester - V.A.G 1274/9-
- Cooling system tester - V.A.G 1274 B-

> **Note**
>
> To perform the leakage test correctly, first run a self-test on the cooling system tester - V.A.G 1274 B-.

![](https://catalog.polo.blue/manuals/vw-polo-engine-ea189-16-tdi-cr/df0ac8d0ac830e4a.webp)

Self-test of cooling system tester - V.A.G 1274 B-

- Operate cooling system tester - V.A.G 1274 B- several times.

![](https://catalog.polo.blue/manuals/vw-polo-engine-ea189-16-tdi-cr/c6c81b9abfaebe32.webp)

- Build up a pressure of 3.0 bar on cooling system tester.
- Observe pressure on pressure gauge of cooling system tester for 30 seconds.

If no pressure builds up or if the pressure drops again:

The cooling system tester - V.A.G 1274 B- is leaking and should not be used.

![](https://catalog.polo.blue/manuals/vw-polo-engine-ea189-16-tdi-cr/e7619a1cbd1058d4.webp)

Checking cooling system for leaks

- Coolant temperature at least 40 °C

> **Warning**
>
> On a warm engine, the cooling system is under high pressure. Danger of scalding due to steam and hot coolant.

Skin and other parts of the body may be scalded.

- Wear protective gloves.
- Wear protective goggles.
- Reduce excess pressure by covering cap of coolant expansion tank with cloths and opening it carefully.

- Open cap -1- on coolant expansion tank.

![](https://catalog.polo.blue/manuals/vw-polo-engine-ea189-16-tdi-cr/824294c1ce464736.webp)

- Fit cooling system tester - V.A.G 1274 B- with adapter - V.A.G 1274/8- to coolant expansion tank.
- Build up pressure of approx. 1.5 bar using hand pump of cooling system tester.

- The pressure must not drop by more than 0.2 bar within 10 minutes.

- If the pressure drops by more than 0.2 bar, locate and rectify leaks.

> **Note**
>
> The pressure drop of 0.2 bar within 10 minutes depends on the how far the coolant can cool down. The colder the engine, the lower the pressure drop.

> **Warning**
>
> Danger of scalding due to steam and hot coolant.

Skin and other parts of the body may be scalded.

- Release pressure by pressing pressure relief valve on cooling system tester until the gauge shows a pressure of 0.

![](https://catalog.polo.blue/manuals/vw-polo-engine-ea189-16-tdi-cr/ab53b3a69099ab6a.webp)

Check pressure relief valve in cap.

- Fit cooling system tester - V.A.G 1274 B- with adapter - V.A.G 1274/9- onto coolant filler cap.
- Using hand pump of cooling system tester, build up pressure and check the opening pressure of the filler cap.

| Colour of filler cap | Opening pressure |
| --- | --- |
| blue | 1.4 … 1.6 bar |
| black | 1.6 … 1.8 bar |

- Renew filler cap, if pressure relief valve does not open as described.
