# 4.2 Removing and installing oil supply line – 1.6 TDI CR engine (EA189)

> Removing and installing oil supply line, 1.6 TDI (Oil circuit) on the VW Polo 6R: 31 steps and 15 drawings.

- Web page: https://catalog.polo.blue/repair-manuals/engine-1-6-tdi-cr-ea189/17-lubrication/removing-and-installing-oil-supply-line/
- Original document: https://cdn.polo.blue/files/16-tdi-cr-engine-cayacaybcayc-workshop-manual-2019.pdf
- 17 – Lubrication, [1.6 TDI CR engine (EA189)](https://catalog.polo.blue/repair-manuals/engine-1-6-tdi-cr-ea189/index.md)
- Previous procedure: [4.1 Assembly overview – oil circuit](https://catalog.polo.blue/repair-manuals/engine-1-6-tdi-cr-ea189/17-lubrication/assembly-overview-oil-circuit/index.md)
- Next procedure: [4.3 Oil spray jets/nozzles](https://catalog.polo.blue/repair-manuals/engine-1-6-tdi-cr-ea189/17-lubrication/oil-spray-jets-nozzles/index.md)

[⇒ 4.2.1 Removing and installing oil supply line, Polo](https://catalog.polo.blue/repair-manuals/engine-1-6-tdi-cr-ea189/17-lubrication/removing-and-installing-oil-supply-line/#t254-158)

## 4.2.1 Removing and installing oil supply line, Polo

![](https://catalog.polo.blue/manuals/vw-polo-engine-ea189-16-tdi-cr/35d6d5ff8c7dae62.webp)

Torque wrench - V.A.G 1331-

![](https://catalog.polo.blue/manuals/vw-polo-engine-ea189-16-tdi-cr/c979c192814bec52.webp)

Tool insert, AF 17 mm - T10395-

![](https://catalog.polo.blue/manuals/vw-polo-engine-ea189-16-tdi-cr/7e13e7345a7d499b.webp)

Used oil collection and extraction unit - V.A.G 1782-

**Removing**

- Remove engine cover panel [⇒ 3 Engine cover panel](https://catalog.polo.blue/repair-manuals/engine-1-6-tdi-cr-ea189/10-removing-and-installing-engine/).
- Remove plenum chamber bulkhead ⇒ General body repairs, exterior; Rep. gr. 50; Plenum chamber bulkhead; Assembly overview - bulkhead.
- Remove noise insulation:
  Polo ⇒ General body repairs, exterior; Rep. gr. 50; Noise insulation; Assembly overview - noise insulation 

![](https://catalog.polo.blue/manuals/vw-polo-engine-ea189-16-tdi-cr/6f09177613efb255.webp)

- Remove drive shaft shield.

Loosen particulate filter to create space for removing and installing the oil supply line with turbocharger support.

![](https://catalog.polo.blue/manuals/vw-polo-engine-ea189-16-tdi-cr/4029d0cc6caad19b.webp)

- Pull electrical connector -2- from pressure differential sender - G 505-.
- Unclip pressure differential sender - G 505- from lower part of fuel filter.

![](https://catalog.polo.blue/manuals/vw-polo-engine-ea189-16-tdi-cr/22aae29cff56e9d5.webp)

- Remove securing clamp -1- between particulate filter and turbocharger.
- Remove securing clamp -1- between particulate filter and turbocharger.

![](https://catalog.polo.blue/manuals/vw-polo-engine-ea189-16-tdi-cr/c6e9501c8aa4a52c.webp)

- Loosen bolt -1-.

![](https://catalog.polo.blue/manuals/vw-polo-engine-ea189-16-tdi-cr/16727f8b924696d9.webp)

- Unscrew nuts -2-, nuts -1- should be disregarded.

![](https://catalog.polo.blue/manuals/vw-polo-engine-ea189-16-tdi-cr/c6e9501c8aa4a52c.webp)

- Now unscrew bolt -1-.
- Push particulate filter aside and fix it in position on plenum chamber bulkhead using suitable means.

to create space for removing and installing the oil supply line with turbocharger support.

![](https://catalog.polo.blue/manuals/vw-polo-engine-ea189-16-tdi-cr/d791a9027b1a1ba5.webp)

- Remove connection pipe -2- leading to cooler for exhaust gas recirculation.

![](https://catalog.polo.blue/manuals/vw-polo-engine-ea189-16-tdi-cr/dd7b13ca69dcd735.webp)

- Loosen oil supply line union nut -arrow- on turbocharger.

Collect escaping oil using used oil collection and extraction unit - V.A.G 1782-.

- Loosen the banjo bolt of the oil supply line [⇒ Item 11 (4.1.2 Assembly overview - oil supply line, Polo)](https://catalog.polo.blue/repair-manuals/engine-1-6-tdi-cr-ea189/17-lubrication/assembly-overview-oil-circuit/#t253-428) on the cylinder block.

![](https://catalog.polo.blue/manuals/vw-polo-engine-ea189-16-tdi-cr/90c483634a72d687.webp)

- Now you can access the securing bolt -arrow- on the retaining clamp for the oil return line on the turbocharger support.
- Unscrew bolt -arrow-.

![](https://catalog.polo.blue/manuals/vw-polo-engine-ea189-16-tdi-cr/b95be5dd8d2f7faf.webp)

- Unscrew oil supply line at turbocharger.
- Remove oil supply line.

> **Caution**
>
> Exhaust gas temperature sender 1 - G 235- conceals the upper bolt of the exhaust gas turbocharger support. D not bend exhaust gas temperature sender 1 - G 235-. It must therefore be removed.

- Remove exhaust gas temperature sender 1 - G 235-.

![](https://catalog.polo.blue/manuals/vw-polo-engine-ea189-16-tdi-cr/e57a316a0199c86f.webp)

- Unscrew upper bolt -arrow- from support on turbocharger.
- Remove banjo bolt [⇒ Item 10 (4.1.2 Assembly overview - oil supply line, Polo)](https://catalog.polo.blue/repair-manuals/engine-1-6-tdi-cr-ea189/17-lubrication/assembly-overview-oil-circuit/#t253-397) of turbocharger support.
- Remove bolts for oil return line [⇒ Item 1 (4.1.2 Assembly overview - oil supply line, Polo)](https://catalog.polo.blue/repair-manuals/engine-1-6-tdi-cr-ea189/17-lubrication/assembly-overview-oil-circuit/#t253-116).
- Remove turbocharger support with oil return pipe.

**Installing**

> **Note**
>
> - Renew the banjo bolts, seals, gaskets, O-rings and self-locking nuts ⇒ Electronic Parts Catalogue (ETKA).
> - Renew the particulate filter clamp ⇒ Electronic Parts Catalogue (ETKA).
> - If particulate filter or pressure differential sender - G 505- is exchanged, pressure differential sender - G 505- must be adapted using vehicle diagnostic tester as a matter of priority: Guided Functions; Adapting pressure differential sender - G 505-.
> - After working on the exhaust system, ensure that the system is not under stress and that there is sufficient clearance to the bodywork. If necessary, loosen double clamp and align silencer and exhaust pipe so that sufficient clearance is maintained to the bodywork and the support rings are evenly loaded.
> - The work procedure must be followed to ensure that the oil supply/return lines together with the turbocharger support are installed free of stress.

- Position oil return line on turbocharger together with turbocharger support on turbocharger and crankcase.
- Fit oil supply line onto turbocharger and crankcase.
- First, bolt the turbocharger support onto the crankcase [⇒ Item 10 (4.1.2 Assembly overview - oil supply line, Polo)](https://catalog.polo.blue/repair-manuals/engine-1-6-tdi-cr-ea189/17-lubrication/assembly-overview-oil-circuit/#t253-397) and turbocharger [⇒ Item 5 (4.1.2 Assembly overview - oil supply line, Polo)](https://catalog.polo.blue/repair-manuals/engine-1-6-tdi-cr-ea189/17-lubrication/assembly-overview-oil-circuit/#t253-250) by hand.
- Then tighten the turbocharger support bolts in several steps up to the specified torque, alternating between the crankcase [⇒ Item 10 (4.1.2 Assembly overview - oil supply line, Polo)](https://catalog.polo.blue/repair-manuals/engine-1-6-tdi-cr-ea189/17-lubrication/assembly-overview-oil-circuit/#t253-397) and turbocharger [⇒ Item 5 (4.1.2 Assembly overview - oil supply line, Polo)](https://catalog.polo.blue/repair-manuals/engine-1-6-tdi-cr-ea189/17-lubrication/assembly-overview-oil-circuit/#t253-250).
- Next tighten the oil supply line union nut and the banjo bolt for the oil supply line on the crankcase.
- Finally tighten the bolt on the oil supply line/turbocharger support clamp.

Specified torques [⇒ 4.1.2 Assembly overview - oil supply line, Polo](https://catalog.polo.blue/repair-manuals/engine-1-6-tdi-cr-ea189/17-lubrication/assembly-overview-oil-circuit/#t253-82).

- Further assembly in reverse order of removal.

Install particulate filter [⇒ 2.2 Removing and installing particulate filter](https://catalog.polo.blue/repair-manuals/engine-1-6-tdi-cr-ea189/26-exhaust-system/removing-and-installing-particulate-filter/#t490-231).

Installation position of exhaust gas temperature sender -G 235-.

![](https://catalog.polo.blue/manuals/vw-polo-engine-ea189-16-tdi-cr/ffcd2751ba76b8f0.webp)

Angled shaft must have a distance -a- = 3 … 5 mm to bolting of turbocharger support.
