# 1.4 Removing and installing oil pump – 1.6 TDI CR engine (EA189)

> Removing and installing oil pump, 1.6 TDI (Sump, oil pump) on the VW Polo 6R: 10 steps and 2 drawings.

- Web page: https://catalog.polo.blue/repair-manuals/engine-1-6-tdi-cr-ea189/17-lubrication/removing-and-installing-oil-pump/
- Original document: https://cdn.polo.blue/files/16-tdi-cr-engine-cayacaybcayc-workshop-manual-2019.pdf
- 17 – Lubrication, [1.6 TDI CR engine (EA189)](https://catalog.polo.blue/repair-manuals/engine-1-6-tdi-cr-ea189/index.md)
- Previous procedure: [1.3 Removing and installing oil level and oil temperature sender G 266](https://catalog.polo.blue/repair-manuals/engine-1-6-tdi-cr-ea189/17-lubrication/removing-and-installing-oil-level-temperature-sender-g266/index.md)
- Next procedure: [1.5 Engine oil](https://catalog.polo.blue/repair-manuals/engine-1-6-tdi-cr-ea189/17-lubrication/engine-oil/index.md)

![](https://catalog.polo.blue/manuals/vw-polo-engine-ea189-16-tdi-cr/76981cebf1340a26.webp)

**Removing**

- Remove sump [⇒ 1.2 Removing and installing sump](https://catalog.polo.blue/repair-manuals/engine-1-6-tdi-cr-ea189/17-lubrication/removing-and-installing-sump/#t228-400).
- When oil pump is to be renewed, unscrew bolts -4- and remove oil intake pipe -3-.
- Unscrew bolts -arrows- and remove baffle -2-.
- Detach oil pump -1- from toothed belt and remove pump.

![](https://catalog.polo.blue/manuals/vw-polo-engine-ea189-16-tdi-cr/b29cd4d84108cfa6.webp)

**Installing**

- Specified torques [⇒ 1.1 Assembly overview - sump/oil pump](https://catalog.polo.blue/repair-manuals/engine-1-6-tdi-cr-ea189/17-lubrication/assembly-overview-sump-oil-pump/#t226-241)

Install in reverse order of removal, observing the following.

> **Note**
>
> Renew O-ring.

- Insert new dowel sleeves when oil pump has no dowel sleeves -arrows- for centring oil pump.
- Check oil pump for ease of movement, turn toothed belt pulley with one finger for this.

> **Note**
>
> Renew tight or sticking oil pump.

- Check toothed belt for oil pump.

> **Note**
>
> - Renew damaged toothed belt.
> - The toothed belt can sag after long use, this is not a fault.

- Fit oil pump with toothed belt pulley into toothed belt and tighten along with baffle.
- Install sump [⇒ 1.2 Removing and installing sump](https://catalog.polo.blue/repair-manuals/engine-1-6-tdi-cr-ea189/17-lubrication/removing-and-installing-sump/#t228-400).
- Replenish engine oil and check oil level [⇒ 1.5.2 Checking engine oil level](https://catalog.polo.blue/repair-manuals/engine-1-6-tdi-cr-ea189/17-lubrication/engine-oil/#t236-82).
