# 3.4 Removing and installing oil pressure switch F1 – 1.6 TDI CR engine (EA189)

> VW Polo 6R (Oil filter, oil pressure switch), step by step: removing and installing oil pressure switch F1, 1.6 TDI – 10 steps and 2 drawings.

- Web page: https://catalog.polo.blue/repair-manuals/engine-1-6-tdi-cr-ea189/17-lubrication/removing-and-installing-oil-pressure-switch-f1/
- Original document: https://cdn.polo.blue/files/16-tdi-cr-engine-cayacaybcayc-workshop-manual-2019.pdf
- 17 – Lubrication, [1.6 TDI CR engine (EA189)](https://catalog.polo.blue/repair-manuals/engine-1-6-tdi-cr-ea189/index.md)
- Previous procedure: [3.3 Checking oil pressure and oil pressure switch](https://catalog.polo.blue/repair-manuals/engine-1-6-tdi-cr-ea189/17-lubrication/checking-oil-pressure-and-oil-pressure-switch/index.md)
- Next procedure: [4.1 Assembly overview – oil circuit](https://catalog.polo.blue/repair-manuals/engine-1-6-tdi-cr-ea189/17-lubrication/assembly-overview-oil-circuit/index.md)

**Removing**

- Remove engine cover panel [⇒ 3 Engine cover panel](https://catalog.polo.blue/repair-manuals/engine-1-6-tdi-cr-ea189/10-removing-and-installing-engine/).

![](https://catalog.polo.blue/manuals/vw-polo-engine-ea189-16-tdi-cr/98499eecf22a806a.webp)

- Press release buttons and remove hose -1- for venting crankcase.
- Move clear vacuum hoses -arrows-.
- Release hose clips -3- and pull air hose off air filter housing.
- Unscrew bolt -2-, swing intake hose with intake connection to rear and pull off of turbocharger.

![](https://catalog.polo.blue/manuals/vw-polo-engine-ea189-16-tdi-cr/0548d2b9ac703ef5.webp)

- Unscrew bolts -2- and -3-, remove engine lifting eyes -1-.
- Separate electrical connector -arrow-.
- Remove oil pressure switch - F1-.

**Installing**

- Specified torques [⇒ 3.1 Assembly overview - oil filter housing](https://catalog.polo.blue/repair-manuals/engine-1-6-tdi-cr-ea189/17-lubrication/assembly-overview-oil-filter-housing/#t244-512) [⇒ 1.1 Assembly overview - cylinder head](https://catalog.polo.blue/repair-manuals/engine-1-6-tdi-cr-ea189/15-cylinder-head-valve-gear/assembly-overview-cylinder-head/#t141-248).

Install in reverse order of removal, observing the following.

> **Note**
>
> Renew the seal.

- Install vacuum line to exhaust gas recirculation cooler.
- Install intake connection.
