# 3.2 Removing and installing oil filter housing – 1.6 TDI CR engine (EA189)

> VW Polo 6R (Oil filter, oil pressure switch), step by step: removing and installing oil filter housing, 1.6 TDI – 18 steps and special tool V.A.G 1782.

- Web page: https://catalog.polo.blue/repair-manuals/engine-1-6-tdi-cr-ea189/17-lubrication/removing-and-installing-oil-filter-housing/
- Original document: https://cdn.polo.blue/files/16-tdi-cr-engine-cayacaybcayc-workshop-manual-2019.pdf
- 17 – Lubrication, [1.6 TDI CR engine (EA189)](https://catalog.polo.blue/repair-manuals/engine-1-6-tdi-cr-ea189/index.md)
- Previous procedure: [3.1 Assembly overview – oil filter housing](https://catalog.polo.blue/repair-manuals/engine-1-6-tdi-cr-ea189/17-lubrication/assembly-overview-oil-filter-housing/index.md)
- Next procedure: [3.3 Checking oil pressure and oil pressure switch](https://catalog.polo.blue/repair-manuals/engine-1-6-tdi-cr-ea189/17-lubrication/checking-oil-pressure-and-oil-pressure-switch/index.md)

Special tools and workshop equipment required 

![](https://catalog.polo.blue/manuals/vw-polo-engine-ea189-16-tdi-cr/d1518fb6b79b7cf8.webp)

- Release lever - 80 - 200-

![](https://catalog.polo.blue/manuals/vw-polo-engine-ea189-16-tdi-cr/0c07a808ba3cc295.webp)

- Used oil collection and extraction unit - V.A.G 1782-

![](https://catalog.polo.blue/manuals/vw-polo-engine-ea189-16-tdi-cr/8c53d334ed01d837.webp)

- Drip tray for workshop hoist - VAS 6208-

![](https://catalog.polo.blue/manuals/vw-polo-engine-ea189-16-tdi-cr/d4a4731a01dd3045.webp)

- Spring-type clip pliers - VAS 6362-

**Removing**

- Remove engine cover panel [⇒ 3 Engine cover panel](https://catalog.polo.blue/repair-manuals/engine-1-6-tdi-cr-ea189/10-removing-and-installing-engine/).

**Polo**

- Remove air intake cowling.

**Continued for all vehicles**

- Drain coolant [⇒ 1.3 Draining and adding coolant](https://catalog.polo.blue/repair-manuals/engine-1-6-tdi-cr-ea189/19-cooling/draining-and-adding-coolant/#t267-554).

![](https://catalog.polo.blue/manuals/vw-polo-engine-ea189-16-tdi-cr/2d8b303c2d11497e.webp)

- Remove oil filter element.

![](https://catalog.polo.blue/manuals/vw-polo-engine-ea189-16-tdi-cr/ec875308197175ea.webp)

- Loosen hose clamps -1- and -2- and remove air hose.

![](https://catalog.polo.blue/manuals/vw-polo-engine-ea189-16-tdi-cr/23d9f41a8813de46.webp)

- Unscrew bolts -arrows-.
- Free off coolant hose -3-.
- Release hose clip -2-.
- Disconnect electrical connection -1- on charge pressure sender - G31- / intake air temperature sensor - G42- and remove right charge air pipe.

![](https://catalog.polo.blue/manuals/vw-polo-engine-ea189-16-tdi-cr/9de0d41450d35b9c.webp)

- Pull out oil dipstick slightly, unscrew bolt -1-.
- Press off clip -2- using removal lever - 80 - 200-.
- Pull oil dipstick guide tube off cylinder block upwards and push to side.

![](https://catalog.polo.blue/manuals/vw-polo-engine-ea189-16-tdi-cr/6c7062d9fee9823d.webp)

- Place drip tray for workshop hoist - VAS 6208- under point of separation.
- Remove coolant hoses. To do this, loosen hose clips -1-.
- Place used oil collection and extraction unit - V.A.G 1782- under engine.
- Unscrew bolts -arrows- and remove oil filter bracket with engine oil cooler.

**Installing**

- Specified torques [⇒ 3.1 Assembly overview - oil filter housing](https://catalog.polo.blue/repair-manuals/engine-1-6-tdi-cr-ea189/17-lubrication/assembly-overview-oil-filter-housing/#t243-200).

Install in reverse order of removal, observing the following.

> **Note**
>
> - Renew gaskets, seals and O-rings.
> - Hose unions and air intake pipes and hoses must be free of oil and grease before installation.
> - Secure all hose connections with the correct type of hose clips (same as original equipment) ⇒ Electronic parts catalogue (ETKA).

- Install oil filter element, replenish engine oil and check oil level [⇒ 1.5.2 Checking engine oil level](https://catalog.polo.blue/repair-manuals/engine-1-6-tdi-cr-ea189/17-lubrication/engine-oil/#t236-82).
- Replenish coolant in cooling system, change coolant if engine oil cooler has been renewed [⇒ 1.3.2 Filling with coolant](https://catalog.polo.blue/repair-manuals/engine-1-6-tdi-cr-ea189/19-cooling/draining-and-adding-coolant/#t270-82).
