# 2.2 Removing and installing engine oil cooler – 1.6 TDI CR engine (EA189)

> Removing and installing engine oil cooler, 1.6 TDI on the VW Polo 6R: 14 steps, special tools V.A.G 1782 and VAS 6208, tightening torques and 9 drawings.

- Web page: https://catalog.polo.blue/repair-manuals/engine-1-6-tdi-cr-ea189/17-lubrication/removing-and-installing-engine-oil-cooler/
- Original document: https://cdn.polo.blue/files/16-tdi-cr-engine-cayacaybcayc-workshop-manual-2019.pdf
- 17 – Lubrication, [1.6 TDI CR engine (EA189)](https://catalog.polo.blue/repair-manuals/engine-1-6-tdi-cr-ea189/index.md)
- Previous procedure: [2.1 Assembly overview – engine oil cooler](https://catalog.polo.blue/repair-manuals/engine-1-6-tdi-cr-ea189/17-lubrication/assembly-overview-engine-oil-cooler/index.md)
- Next procedure: [2.3 Checking engine oil cooler for leaks](https://catalog.polo.blue/repair-manuals/engine-1-6-tdi-cr-ea189/17-lubrication/checking-engine-oil-cooler-for-leaks/index.md)

Special tools and workshop equipment required

![](https://catalog.polo.blue/manuals/vw-polo-engine-ea189-16-tdi-cr/0c07a808ba3cc295.webp)

- Used oil collection and extraction unit - V.A.G 1782-

![](https://catalog.polo.blue/manuals/vw-polo-engine-ea189-16-tdi-cr/5920a034c02b77a6.webp)

- Drip tray for workshop hoist - VAS 6208-

![](https://catalog.polo.blue/manuals/vw-polo-engine-ea189-16-tdi-cr/12d5ed9bede66924.webp)

- Spring-type clip pliers - VAS 6362-

**Removing**

- Remove engine cover panel [⇒ 3 Engine cover panel](https://catalog.polo.blue/repair-manuals/engine-1-6-tdi-cr-ea189/10-removing-and-installing-engine/).

**Polo**

- Remove cowling [⇒ 4.3.2 Removing and installing radiator cowl with radiator fan - V7-, Polo](https://catalog.polo.blue/repair-manuals/engine-1-6-tdi-cr-ea189/19-cooling/removing-installing-radiator-cowl-radiator-fan/#t322-381).

**Continued for all vehicles**

- Drain coolant [⇒ 1.3 Draining and adding coolant](https://catalog.polo.blue/repair-manuals/engine-1-6-tdi-cr-ea189/19-cooling/draining-and-adding-coolant/#t267-554).

![](https://catalog.polo.blue/manuals/vw-polo-engine-ea189-16-tdi-cr/82d02a3507018c0f.webp)

- In addition to draining coolant from engine, pull coolant hose from oil filter holder -arrow-.

![](https://catalog.polo.blue/manuals/vw-polo-engine-ea189-16-tdi-cr/2d8b303c2d11497e.webp)

- Remove oil filter element.

![](https://catalog.polo.blue/manuals/vw-polo-engine-ea189-16-tdi-cr/a2e57db9333f3a7d.webp)

- Unscrew bolts -arrows-.
- Remove oil cooler from housing.

**Installing**

> **Note**
>
> - Renew gaskets, seals and O-rings.
> - Hose unions and air intake pipes and hoses must be free of oil and grease before installation.
> - Secure all hose connections with the correct type of hose clips (same as original equipment) ⇒ Electronic parts catalogue (ETKA).

Install in reverse order.

![](https://catalog.polo.blue/manuals/vw-polo-engine-ea189-16-tdi-cr/1b3b60b5bbeae1d9.webp)

- Insert new seals [⇒ Item 8 (3.1 Assembly overview - oil filter housing)](https://catalog.polo.blue/repair-manuals/engine-1-6-tdi-cr-ea189/17-lubrication/assembly-overview-oil-filter-housing/#t243-643) into oil free lugs -arrow- on oil filter bracket.
- Carefully slide engine oil cooler onto centring pins.

![](https://catalog.polo.blue/manuals/vw-polo-engine-ea189-16-tdi-cr/6d4a2cefd5baf143.webp)

- Press oil cooler on until it is flush -1- with end of centring pins.
- Start new bolts, and screw them in until heads make contact.

![](https://catalog.polo.blue/manuals/vw-polo-engine-ea189-16-tdi-cr/a2e57db9333f3a7d.webp)

- Tighten bolts -arrows- in 3 stages and in diagonal sequence.

- Step 1: tighten by hand
- Step 2: tighten to 5 Nm
- Step 3: tighten to 11 Nm

- Install oil filter element, replenish engine oil and check oil level [⇒ 1.5.2 Checking engine oil level](https://catalog.polo.blue/repair-manuals/engine-1-6-tdi-cr-ea189/17-lubrication/engine-oil/#t236-82).
- Replenish coolant in cooling system, change coolant if engine oil cooler has been renewed [⇒ 1.3.2 Filling with coolant](https://catalog.polo.blue/repair-manuals/engine-1-6-tdi-cr-ea189/19-cooling/draining-and-adding-coolant/#t270-82).

## Tightening torques on this page

### In the steps
| Step | Torque |
| --- | --- |
| Step 2: tighten to 5 Nm | 5 Nm |
| Step 3: tighten to 11 Nm | 11 Nm |
