# 2.3 Checking engine oil cooler for leaks – 1.6 TDI CR engine (EA189)

> Checking engine oil cooler for leaks, 1.6 TDI on the VW Polo 6R: 15 steps, special tools T10007, 3094 and V.A.G 1274 and 3 drawings.

- Web page: https://catalog.polo.blue/repair-manuals/engine-1-6-tdi-cr-ea189/17-lubrication/checking-engine-oil-cooler-for-leaks/
- Original document: https://cdn.polo.blue/files/16-tdi-cr-engine-cayacaybcayc-workshop-manual-2019.pdf
- 17 – Lubrication, [1.6 TDI CR engine (EA189)](https://catalog.polo.blue/repair-manuals/engine-1-6-tdi-cr-ea189/index.md)
- Previous procedure: [2.2 Removing and installing engine oil cooler](https://catalog.polo.blue/repair-manuals/engine-1-6-tdi-cr-ea189/17-lubrication/removing-and-installing-engine-oil-cooler/index.md)
- Next procedure: [3.1 Assembly overview – oil filter housing](https://catalog.polo.blue/repair-manuals/engine-1-6-tdi-cr-ea189/17-lubrication/assembly-overview-oil-filter-housing/index.md)

![](https://catalog.polo.blue/manuals/vw-polo-engine-ea189-16-tdi-cr/44d5850711f861b2.webp)

Special tools and workshop equipment required

- Refractometer - T10007-
- Hose clamps up to 25 mm - 3094-
- Cooling system tester - V.A.G 1274-
- Adapter for cooling system tester - V.A.G 1274/8-
- Pliers for spring-type clips - VAS 5024 A-
- Drip tray for workshop hoist - VAS 6208- 

![](https://catalog.polo.blue/manuals/vw-polo-engine-ea189-16-tdi-cr/711e2303917caa57.webp)

- Torque wrench - V.A.G 1331-

Without illustration:

- Expansion tank - 1K0 121 407 A- or expansion tank - 1J0 121 407 B-
- Plugs - 191 211 343-
- Sealing cap - 1J0 121 324-
- Coolant hose - 251 265 056-

Condition:

- Engine cold

**Test sequence**

- Remove noise insulation:
  Polo ⇒ General body repairs, exterior; Rep. gr. 50; Noise insulation; Assembly overview - noise insulation
- Drain coolant [⇒ 1.3 Draining and adding coolant](https://catalog.polo.blue/repair-manuals/engine-1-6-tdi-cr-ea189/19-cooling/draining-and-adding-coolant/#t267-554).
- Loosen hose clips on engine oil cooler using spring type clip pliers - VAS 5024-.
- Remove engine oil cooler with housing [⇒ 3.1 Assembly overview - oil filter housing](https://catalog.polo.blue/repair-manuals/engine-1-6-tdi-cr-ea189/17-lubrication/assembly-overview-oil-filter-housing/#t243-200).

> **Note**
>
> - Collect escaping coolant with drip tray - V.A.G 1306- or drip tray - VAS 6208-.
> - Collect leaking engine oil with a cleaning cloth, if necessary.

![](https://catalog.polo.blue/manuals/vw-polo-engine-ea189-16-tdi-cr/0724027b07d0c50c.webp)

**Checking when removed**

- Clamp housing with old seal on a suitable, level clean surface.
- Secure sealing plug -2- to breather connection of expansion tank -1-.
- Secure coolant hose -3- to engine oil cooler and expansion tank.
- Fill expansion tank up to “Max” marking.
- Attach cooling system tester - V.A.G 1274- with cooling system tester adapter - V.A.G 1274/8- to expansion tank.
- Use hand pump on tester to create a pressure of about 1.6 bar.
- Watch pressure drop on pressure gauge. A pressure drop within 10 minutes is not permitted.

If the pressure drops:

- Renew engine oil cooler [⇒ 2.2 Removing and installing engine oil cooler](https://catalog.polo.blue/repair-manuals/engine-1-6-tdi-cr-ea189/17-lubrication/removing-and-installing-engine-oil-cooler/#t238-132).

Installation is carried out in the reverse order. When installing, note the following:

- Renew seal for housing.
- Check coolant level, replenish if necessary [⇒ 1.3.2 Filling with coolant](https://catalog.polo.blue/repair-manuals/engine-1-6-tdi-cr-ea189/19-cooling/draining-and-adding-coolant/#t270-82).
- Check engine oil level, replenish if necessary [⇒ 1.5.2 Checking engine oil level](https://catalog.polo.blue/repair-manuals/engine-1-6-tdi-cr-ea189/17-lubrication/engine-oil/#t236-82).
