# 1.1 Assembly overview – sump/oil pump – 1.6 TDI CR engine (EA189)

> Sump/oil pump – assembly overview, 1.6 TDI on the VW Polo 6R: tightening torques and 3 drawings.

- Web page: https://catalog.polo.blue/repair-manuals/engine-1-6-tdi-cr-ea189/17-lubrication/assembly-overview-sump-oil-pump/
- Original document: https://cdn.polo.blue/files/16-tdi-cr-engine-cayacaybcayc-workshop-manual-2019.pdf
- 17 – Lubrication, [1.6 TDI CR engine (EA189)](https://catalog.polo.blue/repair-manuals/engine-1-6-tdi-cr-ea189/index.md)
- Previous procedure: [4 Inlet and exhaust valves](https://catalog.polo.blue/repair-manuals/engine-1-6-tdi-cr-ea189/15-cylinder-head-valve-gear/inlet-and-exhaust-valves/index.md)
- Next procedure: [1.2 Removing and installing sump](https://catalog.polo.blue/repair-manuals/engine-1-6-tdi-cr-ea189/17-lubrication/removing-and-installing-sump/index.md)

![](https://catalog.polo.blue/manuals/vw-polo-engine-ea189-16-tdi-cr/be10dbb8b7569b9c.webp)

- **1** Oil level and oil temperature sender - G266-
  - Removing and installing [⇒ 1.3 Removing and installing oil level and oil temperature sender - G 266-](https://catalog.polo.blue/repair-manuals/engine-1-6-tdi-cr-ea189/17-lubrication/removing-and-installing-oil-level-temperature-sender-g266/#t233-649)
- **2** O-ring
  - Renew
- **3** Oil drain plug
  - 30 Nm
- **4** Seal
  - Renew
- **5** Bolt
  - Specified torque and tightening sequence [⇒ Fig. ““Sump - specified torque and tightening sequence”“, page 222](https://catalog.polo.blue/repair-manuals/engine-1-6-tdi-cr-ea189/17-lubrication/assembly-overview-sump-oil-pump/#t228-82)
- **6** Sump
  - Clean sealing surface before fitting.
  - Install with sealant according to ⇒ Electronic Parts Catalogue (ETKA).
  - Removing and installing [⇒ 1.2 Removing and installing sump](https://catalog.polo.blue/repair-manuals/engine-1-6-tdi-cr-ea189/17-lubrication/removing-and-installing-sump/#t228-400)
- **7** Bolt
  - 16 Nm
- **8** Oil pump
  - With 12 bar pressure relief valve
  - Before installing, check that both dowel sleeves for centring oil pump on cylinder block are fitted.

> **Note**
>
> - If toothed belt or oil pump have to be removed.

- Check oil pump for ease of movement.
- It should be possible to turn belt pulley easily with 1 finger.
- Replace if difficult to turn.

- Removing and installing [⇒ 1.4 Removing and installing oil pump](https://catalog.polo.blue/repair-manuals/engine-1-6-tdi-cr-ea189/17-lubrication/removing-and-installing-oil-pump/#t234-610)

- **9** Toothed belt
  - Check for damage and wear
  - Replace if necessary

> **Note**
>
> - Belts which have been in use longer can sag.
> - This is not a fault and does not necessarily mean belt needs replacing.

- **10** Dowel sleeves
- **11** Cylinder block
- **12** O-ring
  - Renew
- **13** Bolt
  - 9 Nm
- **14** Clip
- **15** Dipstick guide tube
- **16** Bolt
  - 9 Nm
- **17** Oil intake tube
- **18** Baffle plate
- **19** Bolt
  - 16 Nm 
- **20** Bolt
  - Self-locking
  - Renew
  - 9 Nm  

![](https://catalog.polo.blue/manuals/vw-polo-engine-ea189-16-tdi-cr/b22285ebf30ba392.webp)

Sump - specified torque and tightening sequence

> **Note**
>
> - Tighten bolts in 3 stages:

| Stage | Bolts | Specified torque |
| --- | --- | --- |
| 1) | -1 … 20- | In diagonal sequence to 5 Nm |
| 2) | -Arrows- | 40 Nm |
| 3) | -1 … 20- | Diagonally in stages; final torque 13 Nm |

![](https://catalog.polo.blue/manuals/vw-polo-engine-ea189-16-tdi-cr/d15c80378936ead8.webp)

Oil spray jet and pressure relief valve

- **1** Bolt with pressure relief valve, 27 Nm 
- **2** Oil spray jet (for cooling of pistons)

> **Note**
>
> When renewing the oil spray jet, ensure correct allocation to the piston ⇒ Electronic Parts Catalogue (EKTA).

## Tightening torques on this page

### Torque [To the drawing](https://catalog.polo.blue/repair-manuals/engine-1-6-tdi-cr-ea189/17-lubrication/assembly-overview-sump-oil-pump/#t226-241)
| Item | Part | Torque | Notes |
| --- | --- | --- | --- |
| 3 | Oil drain plug | 30 Nm |  |
| 7 | Bolt | 16 Nm |  |
| 13 | Bolt | 9 Nm |  |
| 16 | Bolt | 9 Nm |  |
| 19 | Bolt | 16 Nm |  |
| 20 | Bolt | 9 Nm | Self-locking · Renew |
| 1 | Bolt with pressure relief valve | 27 Nm |  |

### Torque
| Part | Torque |
| --- | --- |
| 1) | In diagonal sequence to 5 Nm |
| 2) | 40 Nm |
| 3) | Diagonally in stages; final torque 13 Nm |
