# 3.1 Assembly overview – oil filter housing – 1.6 TDI CR engine (EA189)

> Oil filter housing – assembly overview, 1.6 TDI (Oil filter, oil pressure switch) on the VW Polo 6R: 2 steps, tightening torques and 4 drawings.

- Web page: https://catalog.polo.blue/repair-manuals/engine-1-6-tdi-cr-ea189/17-lubrication/assembly-overview-oil-filter-housing/
- Original document: https://cdn.polo.blue/files/16-tdi-cr-engine-cayacaybcayc-workshop-manual-2019.pdf
- 17 – Lubrication, [1.6 TDI CR engine (EA189)](https://catalog.polo.blue/repair-manuals/engine-1-6-tdi-cr-ea189/index.md)
- Previous procedure: [2.3 Checking engine oil cooler for leaks](https://catalog.polo.blue/repair-manuals/engine-1-6-tdi-cr-ea189/17-lubrication/checking-engine-oil-cooler-for-leaks/index.md)
- Next procedure: [3.2 Removing and installing oil filter housing](https://catalog.polo.blue/repair-manuals/engine-1-6-tdi-cr-ea189/17-lubrication/removing-and-installing-oil-filter-housing/index.md)

> **Warning**
>
> Do not lubricate the rubber seals, item 8 and 11, with oil. The coolant seals would otherwise swell up.

![](https://catalog.polo.blue/manuals/vw-polo-engine-ea189-16-tdi-cr/a89c130aa85ae906.webp)

![](https://catalog.polo.blue/manuals/vw-polo-engine-ea189-16-tdi-cr/205353d82161eaf3.webp)

- **1** Cap, 25 Nm
- **2** O-ring
  - Renew
- **3** O-ring
  - Renew
- **4** O-ring
  - Renew
- **5** Oil filter element
  - Observe notes [⇒ 2.1 Assembly overview - engine oil cooler](https://catalog.polo.blue/repair-manuals/engine-1-6-tdi-cr-ea189/17-lubrication/assembly-overview-engine-oil-cooler/#t237-222)
  - Observe change intervals.
- **6** Engine oil cooler
  - Observe notes [⇒ 2.1 Assembly overview - engine oil cooler](https://catalog.polo.blue/repair-manuals/engine-1-6-tdi-cr-ea189/17-lubrication/assembly-overview-engine-oil-cooler/#t237-222)
  - Removing and installing [⇒ 3.2 Removing and installing oil filter housing](https://catalog.polo.blue/repair-manuals/engine-1-6-tdi-cr-ea189/17-lubrication/removing-and-installing-oil-filter-housing/#t244-663)
  - Renew coolant after replacing.
  - Checking engine oil cooler for leaks [⇒ 2.3 Checking engine oil cooler for leaks](https://catalog.polo.blue/repair-manuals/engine-1-6-tdi-cr-ea189/17-lubrication/checking-engine-oil-cooler-for-leaks/#t240-531)
- **7** 11 Nm 
- **8** Rubber seals
  - Renew
  - Insert into lugs on engine oil cooler.
  - May not be lubricated with oil
- **9** Bolt
  - Renew
  - Specified torque and tightening sequence [⇒ 3.1 Assembly overview - oil filter housing](https://catalog.polo.blue/repair-manuals/engine-1-6-tdi-cr-ea189/17-lubrication/assembly-overview-oil-filter-housing/#t244-340) 
- **10** Oil filter bracket
  - Ensure clearance to adjacent components
- **11** Rubber seals
  - Renew
  - Fit into lugs on oil filter bracket.
  - May not be lubricated with oil

> **Note**
>
> - To change oil filter
> - Unclip vacuum lines -arrows- and lay to side. 

![](https://catalog.polo.blue/manuals/vw-polo-engine-ea189-16-tdi-cr/847b4c0c9ff3bed2.webp)

Oil filter bracket - specified torques and installation sequence

> **Note**
>
> Renew oil filter bracket bolts -arrows-.

- First tighten upper left and lower right bolts.
- Tighten bolts in 2 stages:

| Stage | Bolts | Specified torque/turning further angle |
| --- | --- | --- |
| 1) | -Arrows- | In diagonal sequence to 14 Nm |
| 2) | -Arrows- | turn 180° further diagonally |

![](https://catalog.polo.blue/manuals/vw-polo-engine-ea189-16-tdi-cr/bab028a825597b8c.webp)

Oil pressure switch - F1-

- With seal
- Renewing seal
- Switch pressure 0.3 to 0.6 bar
- Removing and installing [⇒ 3.4 Removing and installing oil pressure switch - F1-](https://catalog.polo.blue/repair-manuals/engine-1-6-tdi-cr-ea189/17-lubrication/removing-and-installing-oil-pressure-switch-f1/#t250-417)
- Checking [⇒ 3.3 Checking oil pressure and oil pressure switch](https://catalog.polo.blue/repair-manuals/engine-1-6-tdi-cr-ea189/17-lubrication/checking-oil-pressure-and-oil-pressure-switch/#t247-642)
- Specified torque: 20 Nm

## Tightening torques on this page

### Torque
| Item | Part | Torque |
| --- | --- | --- |
| 1 | Cap | 25 Nm |
| 7 |  | 11 Nm |

### Torque
| Part | Torque |
| --- | --- |
| 1) | In diagonal sequence to 14 Nm |

### In the steps
| Step | Torque |
| --- | --- |
| Specified torque: 20 Nm | 20 Nm |
