# 3.2 Renewing needle bearing in crankshaft – 1.6 TDI CR engine (EA189)

> Renewing needle bearing in crankshaft, 1.6 TDI on the VW Polo 6R: 6 steps, special tools VAS 251 621, VAS 251 635 and VW 207 C and 6 drawings.

- Web page: https://catalog.polo.blue/repair-manuals/engine-1-6-tdi-cr-ea189/13-crankshaft-group/renewing-needle-bearing-in-crankshaft/
- Original document: https://cdn.polo.blue/files/16-tdi-cr-engine-cayacaybcayc-workshop-manual-2019.pdf
- 13 – Crankshaft group, [1.6 TDI CR engine (EA189)](https://catalog.polo.blue/repair-manuals/engine-1-6-tdi-cr-ea189/index.md)
- Previous procedure: [3.1 Assembly overview – crankshaft](https://catalog.polo.blue/repair-manuals/engine-1-6-tdi-cr-ea189/13-crankshaft-group/assembly-overview-crankshaft/index.md)
- Next procedure: [3.3 Crankshaft dimensions](https://catalog.polo.blue/repair-manuals/engine-1-6-tdi-cr-ea189/13-crankshaft-group/crankshaft-dimensions/index.md)

Only vehicles with a dual clutch gearbox

Special tools and workshop equipment required

![](https://catalog.polo.blue/manuals/vw-polo-engine-ea189-16-tdi-cr/dc37656c912350d5.webp)

- Counter support, e.g. KUKKO 22-1 - VAS 251 621-

![](https://catalog.polo.blue/manuals/vw-polo-engine-ea189-16-tdi-cr/a091e6905f260221.webp)

- Internal puller - VAS 251 635-

![](https://catalog.polo.blue/manuals/vw-polo-engine-ea189-16-tdi-cr/25469e5f2bad2fe3.webp)

- Pin - VW 207 C-

Condition:

- The front edges of the inner puller must be free of chips.
- Gearbox has been removed.

![](https://catalog.polo.blue/manuals/vw-polo-engine-ea189-16-tdi-cr/e95a269003fcea66.webp)

Pulling out needle roller bearing

- Pull out needle bearing -1- with internal puller - VAS 251 635-
  - A- and counter support, e.g. KUKKO 22-1 - VAS 251 621-
  - B- from crankshaft -2-.
- The internal puller must be positioned behind the needle-andcage assembly -arrow-.

![](https://catalog.polo.blue/manuals/vw-polo-engine-ea189-16-tdi-cr/df87d47c2db3d5b5.webp)

**Installing**

- Clean bearing seat in crankshaft and apply as thin coating of grease.
- Drive needle bearing into crankshaft to installation depth using drift - VW 207 C-.

![](https://catalog.polo.blue/manuals/vw-polo-engine-ea189-16-tdi-cr/12ac5915b02a3773.webp)

Installation depth: dimension -a- = 1.5 mm

> **Note**
>
> If the needle bearing is inadvertently driven in too far, it must be renewed because it will be damaged when it is pulled out again.
