# 1.3 Removing and installing tensioner for poly V-belt – 1.6 TDI CR engine (EA189)

> VW Polo 6R (Cylinder block (pulley end)), step by step: removing and installing tensioner for poly V-belt, 1.6 TDI – 17 steps and tightening torques.

- Web page: https://catalog.polo.blue/repair-manuals/engine-1-6-tdi-cr-ea189/13-crankshaft-group/removing-and-installing-tensioner-for-poly-v-belt/
- Original document: https://cdn.polo.blue/files/16-tdi-cr-engine-cayacaybcayc-workshop-manual-2019.pdf
- 13 – Crankshaft group, [1.6 TDI CR engine (EA189)](https://catalog.polo.blue/repair-manuals/engine-1-6-tdi-cr-ea189/index.md)
- Previous procedure: [1.2 Removing and installing poly-V belt](https://catalog.polo.blue/repair-manuals/engine-1-6-tdi-cr-ea189/13-crankshaft-group/removing-and-installing-poly-v-belt/index.md)
- Next procedure: [1.4 Removing and installing vibration damper](https://catalog.polo.blue/repair-manuals/engine-1-6-tdi-cr-ea189/13-crankshaft-group/removing-and-installing-vibration-damper/index.md)

Special tools, testers, measuring instruments and auxiliary items required

Torque wrench - V.A.G 1332- 

**Removing**

- Remove poly V-belt [⇒ 1.2.3 Removing and installing poly V-belt, poly V-belt drive with tensioning element and air-conditioning compressor](https://catalog.polo.blue/repair-manuals/engine-1-6-tdi-cr-ea189/13-crankshaft-group/removing-and-installing-poly-v-belt/#t89-549).

![](https://catalog.polo.blue/manuals/vw-polo-engine-ea189-16-tdi-cr/ec875308197175ea.webp)

- Loosen clips -1- + -2-, remove connecting hose on »cold side«.

**Polo**

![](https://catalog.polo.blue/manuals/vw-polo-engine-ea189-16-tdi-cr/c2157a5bef2de403.webp)

- Unscrew bolts -3, 4, 6-.
- Carefully push coolant lines -5- slightly to the side.

**Continued for all vehicles**

![](https://catalog.polo.blue/manuals/vw-polo-engine-ea189-16-tdi-cr/23d9f41a8813de46.webp)

- Unscrew securing bolts -arrows- from charge air pipe and disconnect connector -1- from charge air pressure sender - G31-.

![](https://catalog.polo.blue/manuals/vw-polo-engine-ea189-16-tdi-cr/560544959c07a537.webp)

- Open clamp -2-, lay coolant hose -3- to side and remove charge air pipe.
- Remove air conditioner compressor; do not detach refrigerant lines on air conditioner compressor.
- Refrigerant circuit remains closed.
- Use suitable means to suspend air conditioner compressor on body ⇒ Heating, air conditioning; Rep. gr. 87; Air conditioner compressor; Removing and installing air conditioner compressor.

![](https://catalog.polo.blue/manuals/vw-polo-engine-ea189-16-tdi-cr/a66415350506452c.webp)

- Unscrew securing bolt -2-.

**Polo**

![](https://catalog.polo.blue/manuals/vw-polo-engine-ea189-16-tdi-cr/b758fa0687dbc16d.webp)

- Pull tensioning element forwards slightly.

![](https://catalog.polo.blue/manuals/vw-polo-engine-ea189-16-tdi-cr/2665f4c3a3b7832e.webp)

- Turn tensioning element clockwise through 180°.

![](https://catalog.polo.blue/manuals/vw-polo-engine-ea189-16-tdi-cr/bda5b79753f5dfb1.webp)

- Pull tensioning element under alternator downwards at an angle out of its retainer.

**Installing**

Tensioning element installation is carried out in the reverse sequence of removal. During this procedure, observe the following:

![](https://catalog.polo.blue/manuals/vw-polo-engine-ea189-16-tdi-cr/a08534d6273aac64.webp)

- Screw tensioning element under alternator into its retainer.

![](https://catalog.polo.blue/manuals/vw-polo-engine-ea189-16-tdi-cr/39306edbe549da56.webp)

- Turn tensioning element anticlockwise through 180°.

![](https://catalog.polo.blue/manuals/vw-polo-engine-ea189-16-tdi-cr/2940ffb417d6e468.webp)

- Guide tensioning element into its retainer.

- Specified torques for poly V-belt drive with tensioning element [⇒ 1.1.2 Assembly overview - poly V-belt drive with tensioning element and air conditioner compressor](https://catalog.polo.blue/repair-manuals/engine-1-6-tdi-cr-ea189/13-crankshaft-group/assembly-overview-poly-v-belt-drive/#t85-82).

![](https://catalog.polo.blue/manuals/vw-polo-engine-ea189-16-tdi-cr/ff0fd3122ecec292.webp)

Restore coolant lines -5- to their installation position, tighten -3, 4, 6-. 8 Nm.

**Continued for all vehicles**

- Install poly V-belt [⇒ 1.2 Removing and installing poly-V belt](https://catalog.polo.blue/repair-manuals/engine-1-6-tdi-cr-ea189/13-crankshaft-group/removing-and-installing-poly-v-belt/#t86-543).

## Tightening torques on this page

### In the steps
| Step | Torque |
| --- | --- |
| Restore coolant lines -5- to their installation position, tighten -3, 4, 6-. 8 Nm. | 8 Nm |
