# 4.2 Removing and installing pistons – 1.6 TDI CR engine (EA189)

> Removing and installing pistons, 1.6 TDI (Pistons and conrods) on the VW Polo 6R: 10 steps, special tool VW 222 A and 1 drawing.

- Web page: https://catalog.polo.blue/repair-manuals/engine-1-6-tdi-cr-ea189/13-crankshaft-group/removing-and-installing-pistons/
- Original document: https://cdn.polo.blue/files/16-tdi-cr-engine-cayacaybcayc-workshop-manual-2019.pdf
- 13 – Crankshaft group, [1.6 TDI CR engine (EA189)](https://catalog.polo.blue/repair-manuals/engine-1-6-tdi-cr-ea189/index.md)
- Previous procedure: [4.1 Assembly overview – pistons and conrods](https://catalog.polo.blue/repair-manuals/engine-1-6-tdi-cr-ea189/13-crankshaft-group/assembly-overview-pistons-and-conrods/index.md)
- Next procedure: [4.3 Measuring piston projection at “TDC”](https://catalog.polo.blue/repair-manuals/engine-1-6-tdi-cr-ea189/13-crankshaft-group/measuring-piston-projection-at-tdc/index.md)

Special tools and workshop equipment required

![](https://catalog.polo.blue/manuals/vw-polo-engine-ea189-16-tdi-cr/5f4e352d750b0850.webp)

- Pin - VW 222 A-
- Piston ring clamp, commercially available 

**Removing**

- Engine secured to engine and gearbox support [⇒ 1.3 Securing engine on engine and gearbox support](https://catalog.polo.blue/repair-manuals/engine-1-6-tdi-cr-ea189/10-removing-and-installing-engine/securing-engine-on-engine-and-gearbox-support/#t56-231)

- Removing cylinder head [⇒ 15 – Cylinder head, valve gear](https://catalog.polo.blue/repair-manuals/engine-1-6-tdi-cr-ea189/15-cylinder-head-valve-gear/)
- Mark installation position and allocation of conrod bearing caps to conrods as an aid for reinstalling [⇒ 4.1 Assembly overview - pistons and conrods](https://catalog.polo.blue/repair-manuals/engine-1-6-tdi-cr-ea189/13-crankshaft-group/assembly-overview-pistons-and-conrods/#t133-197).
- Unscrew conrod bearing cap.
- Withdraw piston upwards together with conrod.

> **Note**
>
> If the piston pin is difficult to move, heat the piston to approx. 60° C.

- Remove retaining ring from piston pin eye.
- Drive out piston pin using drift - VW 222 A-.

**Installing**

Install in reverse order of removal, observing the following.

- Specified torques [⇒ 4.1 Assembly overview - pistons and conrods](https://catalog.polo.blue/repair-manuals/engine-1-6-tdi-cr-ea189/13-crankshaft-group/assembly-overview-pistons-and-conrods/#t133-197).

> **Note**
>
> If a further tightening angle is specified for certain bolts, these must be renewed.

- Oil running surfaces of bearing shells.
- Install piston with piston ring clamp.

Installation position:

- Piston [⇒ 4.1 Assembly overview - pistons and conrods](https://catalog.polo.blue/repair-manuals/engine-1-6-tdi-cr-ea189/13-crankshaft-group/assembly-overview-pistons-and-conrods/#t135-537)
- Bearing shells in conrods [⇒ 4.1 Assembly overview - pistons and conrods](https://catalog.polo.blue/repair-manuals/engine-1-6-tdi-cr-ea189/13-crankshaft-group/assembly-overview-pistons-and-conrods/#t136-82).

- Install conrod bearing cap in accordance with marking.
- Install cylinder head [⇒ 15 – Cylinder head, valve gear](https://catalog.polo.blue/repair-manuals/engine-1-6-tdi-cr-ea189/15-cylinder-head-valve-gear/).
