# 2.2 Removing and installing flywheel – 1.6 TDI CR engine (EA189)

> Removing and installing flywheel, 1.6 TDI (Cylinder block, gearbox end) on the VW Polo 6R: 8 steps, special tool 3067 and 4 drawings.

- Web page: https://catalog.polo.blue/repair-manuals/engine-1-6-tdi-cr-ea189/13-crankshaft-group/removing-and-installing-flywheel/
- Original document: https://cdn.polo.blue/files/16-tdi-cr-engine-cayacaybcayc-workshop-manual-2019.pdf
- 13 – Crankshaft group, [1.6 TDI CR engine (EA189)](https://catalog.polo.blue/repair-manuals/engine-1-6-tdi-cr-ea189/index.md)
- Previous procedure: [2.1 Assembly overview – cylinder block, gearbox end](https://catalog.polo.blue/repair-manuals/engine-1-6-tdi-cr-ea189/13-crankshaft-group/assembly-overview-cylinder-block-gearbox-end/index.md)
- Next procedure: [2.3 Removing and installing sealing flange on gearbox side](https://catalog.polo.blue/repair-manuals/engine-1-6-tdi-cr-ea189/13-crankshaft-group/removing-installing-sealing-flange-gearbox-side/index.md)

Special tools and workshop equipment required

![](https://catalog.polo.blue/manuals/vw-polo-engine-ea189-16-tdi-cr/de365ef920b3edc6.webp)

- Counter-hold tool - 3067-

**Removing**

- Remove gearbox ⇒ Rep. gr. 34; Removing and installing gearbox; Removing gearbox.

> **Caution**
>
> In order to avoid destruction of the dual-mass flywheel, you are not allowed to undo the bolts -B- with a pneumatic/impact screwdriver. It is only permissible to remove the bolts by hand.

- Mark position of dual-mass flywheel in relation to engine.

![](https://catalog.polo.blue/manuals/vw-polo-engine-ea189-16-tdi-cr/faae684f2032ad17.webp)

- Rotate the dual-mass flywheel -A- so that the bolts -B- align centrally with the holes -arrows-.
- When unscrewing bolts -B-, ensure that none of the bolt heads come into contact with the dual-mass flywheel -arrows-. The flywheel will otherwise be damaged when the bolts are unscrewed further.

![](https://catalog.polo.blue/manuals/vw-polo-engine-ea189-16-tdi-cr/a0fc7d03fa1e4481.webp)

- Insert counterhold - 3067- in hole on cylinder block -B-.
- Unscrew dual-mass flywheel.

**Installing**

Installation is carried out in the reverse order. When installing, note the following:

- Specified torque [⇒ Item 1 (2.1 Assembly overview - cylinder block, gearbox end)](https://catalog.polo.blue/repair-manuals/engine-1-6-tdi-cr-ea189/13-crankshaft-group/assembly-overview-cylinder-block-gearbox-end/#t116-217)

- Use new bolts for securing.

![](https://catalog.polo.blue/manuals/vw-polo-engine-ea189-16-tdi-cr/1ad3f56f1ff3e121.webp)

- Insert counter hold - 3067- in hole on cylinder block -A-.
