# 1.8 Removing and installing engine bracket – 1.6 TDI CR engine (EA189)

> Removing and installing engine bracket, 1.6 TDI (Cylinder block (pulley end)) on the VW Polo 6R: 25 steps and 13 drawings.

- Web page: https://catalog.polo.blue/repair-manuals/engine-1-6-tdi-cr-ea189/13-crankshaft-group/removing-and-installing-engine-bracket/
- Original document: https://cdn.polo.blue/files/16-tdi-cr-engine-cayacaybcayc-workshop-manual-2019.pdf
- 13 – Crankshaft group, [1.6 TDI CR engine (EA189)](https://catalog.polo.blue/repair-manuals/engine-1-6-tdi-cr-ea189/index.md)
- Previous procedure: [1.7 Removing and installing sealing flange on pulley end](https://catalog.polo.blue/repair-manuals/engine-1-6-tdi-cr-ea189/13-crankshaft-group/removing-installing-sealing-flange-pulley-end/index.md)
- Next procedure: [2.1 Assembly overview – cylinder block, gearbox end](https://catalog.polo.blue/repair-manuals/engine-1-6-tdi-cr-ea189/13-crankshaft-group/assembly-overview-cylinder-block-gearbox-end/index.md)

[⇒ 1.8.4 Removing and installing engine bracket, Polo](https://catalog.polo.blue/repair-manuals/engine-1-6-tdi-cr-ea189/13-crankshaft-group/removing-and-installing-engine-bracket/#t112-82)

## 1.8.4 Removing and installing engine bracket, Polo

Special tools, testers, measuring instruments and auxiliary items required [⇒ 2.2.4 Supporting engine in installation position, Polo](https://catalog.polo.blue/repair-manuals/engine-1-6-tdi-cr-ea189/10-removing-and-installing-engine/supporting-engine-in-installation-position/#t77-298)

**Removing**

- Remove engine cover panel [⇒ 3 Engine cover panel](https://catalog.polo.blue/repair-manuals/engine-1-6-tdi-cr-ea189/10-removing-and-installing-engine/).

![](https://catalog.polo.blue/manuals/vw-polo-engine-ea189-16-tdi-cr/96413f12c52673b0.webp)

Pre-heater line -arrow 2- is not necessarily installed.

![](https://catalog.polo.blue/manuals/vw-polo-engine-ea189-16-tdi-cr/9354f0505a9d7765.webp)

- In order to ensure that vacuum hose -arrow 1- from brake servo to engine is not damaged, you must remove it ⇒ Brake systems; Rep. gr. 47; Brake servo/brake master cylinder; Assembly overview - brake servo/brake master cylinder.

![](https://catalog.polo.blue/manuals/vw-polo-engine-ea189-16-tdi-cr/6aa57a41162f7bb7.webp)

- Set up support bracket - 10 - 222 A- with necessary adapters and support engine in installation position [⇒ 2.2.4 Supporting engine in installation position, Polo](https://catalog.polo.blue/repair-manuals/engine-1-6-tdi-cr-ea189/10-removing-and-installing-engine/supporting-engine-in-installation-position/#t77-298).

> **Note**
>
> - The assembly mounting may only be removed if the engine is supported with support bracket 10 - 222A.
> - The engine bracket must be loosened only when the assembly mounting has been removed.

- Remove front right wheel housing liner.

![](https://catalog.polo.blue/manuals/vw-polo-engine-ea189-16-tdi-cr/00b81f316b0bbcb6.webp)

- Release coolant expansion tank to create space to remove engine bracket.

![](https://catalog.polo.blue/manuals/vw-polo-engine-ea189-16-tdi-cr/ac32ca43b60574a8.webp)

- Separate fuel supply line and return line at fuel transfer point.

The procedure for this is explained in ⇒ Rep. gr. 20; Push-on couplings; Detaching plug-in connector.

- Catch any escaping fuel.

![](https://catalog.polo.blue/manuals/vw-polo-engine-ea189-16-tdi-cr/5bdf0b61356652ac.webp)

- Use a finger to release locking lug of fuel pre-heater valve.
- Pull fuel pre-heater valve upwards out of coolant expansion tank guide.

![](https://catalog.polo.blue/manuals/vw-polo-engine-ea189-16-tdi-cr/1039036cb5825db2.webp)

- Unclip fuel filter from lower part of fuel filter.
- Remove fuel filter upwards.
- Place fuel filter and fuel hoses together with fuel pre-heater valve on engine.
- Remove lower part of fuel filter ⇒ Rep. gr. 20; Fuel filter; Removing and installing fuel filter.

![](https://catalog.polo.blue/manuals/vw-polo-engine-ea189-16-tdi-cr/db25b78ec9eecc9b.webp)

- Remove upper toothed belt guard -arrows-.

![](https://catalog.polo.blue/manuals/vw-polo-engine-ea189-16-tdi-cr/f08b34b6c93c12c4.webp)

- Remove assembly mounting completely [⇒ 2.1.3 Removing and installing assembly mountings](https://catalog.polo.blue/repair-manuals/engine-1-6-tdi-cr-ea189/10-removing-and-installing-engine/assembly-overview-assembly-mountings/#t69-476).

![](https://catalog.polo.blue/manuals/vw-polo-engine-ea189-16-tdi-cr/a5a8ee0badba2e1f.webp)

- Remove pendulum support [⇒ 2.1.2 Assembly overview – assembly mountings, Polo](https://catalog.polo.blue/repair-manuals/engine-1-6-tdi-cr-ea189/10-removing-and-installing-engine/assembly-overview-assembly-mountings/#t68-82).

> **Warning**
>
> When raising and lowering engine using support bracket - 10-222A-, ensure that no components or hoses are damaged, overstretched or torn off.

- Pull engine as far as possible towards radiator.

> **Note**
>
> Remove securing bolt -1- together with engine bracket. Raise and lower the engine. If necessary, use the spindle from support bracket - 10 - 222 A- to remove or start bolts -2- and -3-.

![](https://catalog.polo.blue/manuals/vw-polo-engine-ea189-16-tdi-cr/5692adea8241e46f.webp)

- Remove securing bolts from engine bracket in sequence -2…1-.

- Available installation space is very restricted.
- Proceed with caution to avoid damaging vehicle and engine.

- Remove engine bracket upwards.

**Installing**

Install in reverse order. During this procedure, observe the following:

> **Caution**
>
> The tightening sequence and specified torques for the engine bracket securing bolts must always be followed. Otherwise the engine bracket can be stressed and it can break.

- Insert engine bracket from above.

> **Note**
>
> Fit securing bolt -1- together with engine bracket. Raise and lower engine using spindle of support bracket - 10 - 222 A- to remove or start bolts -2- and -3-.

- First tighten new securing bolts hand-tight in sequence -1…3-. 

![](https://catalog.polo.blue/manuals/vw-polo-engine-ea189-16-tdi-cr/bdb3d7689e764025.webp)

Tightening sequence for engine bracket

- Retighten securing bolts in tightening sequence to prescribed specified torque [⇒ Item 31 (2.1.2 Assembly overview - toothed belt, Polo)](https://catalog.polo.blue/repair-manuals/engine-1-6-tdi-cr-ea189/15-cylinder-head-valve-gear/assembly-overview-toothed-belt/#t188-711).

![](https://catalog.polo.blue/manuals/vw-polo-engine-ea189-16-tdi-cr/0da4f2c50329b9c6.webp)

- Position engine assembly mounting but first tighten bolts -A-. Specified torque [⇒ 2.1.2 Assembly overview – assembly mountings, Polo](https://catalog.polo.blue/repair-manuals/engine-1-6-tdi-cr-ea189/10-removing-and-installing-engine/assembly-overview-assembly-mountings/#t68-82).
- Next bring engine bracket into contact with assembly mounting using spindle.
- Fit bolts -B- in place and then tighten to specified torque [⇒ 2.1.2 Assembly overview – assembly mountings, Polo](https://catalog.polo.blue/repair-manuals/engine-1-6-tdi-cr-ea189/10-removing-and-installing-engine/assembly-overview-assembly-mountings/#t68-82)

Further assembly is performed in the reverse order of removal. During this procedure, observe the following:

- Ensure fuel hoses are seated correctly.
- Do not interchange supply line and return line (return line blue or with blue marking, supply line black).
