# 3.4 Measuring axial clearance of crankshaft – 1.6 TDI CR engine (EA189)

> Measuring axial clearance of crankshaft, 1.6 TDI on the VW Polo 6R: 4 steps, special tools VW 387 and VAS 6079 and 3 drawings.

- Web page: https://catalog.polo.blue/repair-manuals/engine-1-6-tdi-cr-ea189/13-crankshaft-group/measuring-axial-clearance-of-crankshaft/
- Original document: https://cdn.polo.blue/files/16-tdi-cr-engine-cayacaybcayc-workshop-manual-2019.pdf
- 13 – Crankshaft group, [1.6 TDI CR engine (EA189)](https://catalog.polo.blue/repair-manuals/engine-1-6-tdi-cr-ea189/index.md)
- Previous procedure: [3.3 Crankshaft dimensions](https://catalog.polo.blue/repair-manuals/engine-1-6-tdi-cr-ea189/13-crankshaft-group/crankshaft-dimensions/index.md)
- Next procedure: [3.5 Measuring radial clearance of crankshaft](https://catalog.polo.blue/repair-manuals/engine-1-6-tdi-cr-ea189/13-crankshaft-group/measuring-radial-clearance-of-crankshaft/index.md)

Special tools and workshop equipment required

![](https://catalog.polo.blue/manuals/vw-polo-engine-ea189-16-tdi-cr/ff52267ab2677eb6.webp)

- Universal dial gauge holder - VW 387-

![](https://catalog.polo.blue/manuals/vw-polo-engine-ea189-16-tdi-cr/e1fdac834d48fe7c.webp)

- Dial gauge - VAS 6079-

![](https://catalog.polo.blue/manuals/vw-polo-engine-ea189-16-tdi-cr/f4d7e2ac81690d67.webp)

**Procedure**

- Screw dial gauge - VAS 6079- with universal dial gauge bracket - VW 387- to cylinder block as shown in the illustration.
- Position dial gauge against crank web.
- Press crankshaft against dial gauge by hand and set gauge to “0”.
- Push crankshaft away from dial gauge and read off measured value.

Axial clearance:

- New: 0.07 to 0.17 mm
- Wear limit: 0.37 mm
