# 3.1 Removing and installing engine cover – 1.6 TDI CR engine (EA189)

> Removing and installing engine cover, 1.6 TDI (Engine cover panel) on the VW Polo 6R: 3 steps and 2 drawings.

- Web page: https://catalog.polo.blue/repair-manuals/engine-1-6-tdi-cr-ea189/10-removing-and-installing-engine/removing-and-installing-engine-cover/
- Original document: https://cdn.polo.blue/files/16-tdi-cr-engine-cayacaybcayc-workshop-manual-2019.pdf
- 10 – Removing and installing engine, [1.6 TDI CR engine (EA189)](https://catalog.polo.blue/repair-manuals/engine-1-6-tdi-cr-ea189/index.md)
- Previous procedure: [2.3 Adjusting assembly mountings](https://catalog.polo.blue/repair-manuals/engine-1-6-tdi-cr-ea189/10-removing-and-installing-engine/adjusting-assembly-mountings/index.md)
- Next procedure: [1.1 Assembly overview – poly V-belt drive](https://catalog.polo.blue/repair-manuals/engine-1-6-tdi-cr-ea189/13-crankshaft-group/assembly-overview-poly-v-belt-drive/index.md)

**Removing**

> **Caution**
>
> The engine cover retainer on the cylinder head cover can break if not removed correctly. Always remove engine cover according to following instructions.

![](https://catalog.polo.blue/manuals/vw-polo-engine-ea189-16-tdi-cr/e474271b541b7865.webp)

- Pull engine cover panel upwards out of fasteners in areas of -arrows- and in sequence shown. To do this, grip as far beneath engine cover panel as possible.

**Installing**

> **Caution**
>
> Before installing engine cover panel, check the 4 securing elements (ball sockets) in the correct positions. Reset to correct position if necessary. Otherwise the engine cover panel may be damaged.

![](https://catalog.polo.blue/manuals/vw-polo-engine-ea189-16-tdi-cr/8ae39c63cde00182.webp)

- Press engine cover panel ball sockets into correct position.
- Position engine cover panel on securing points and press corners into fasteners.
