# 3.2 Checking vacuum system – 1.6 TDI CR engine (EA189)

> Checking vacuum system, 1.6 TDI (Repair notes) on the VW Polo 6R: 4 steps, special tool VAS 6213 and 1 drawing.

- Web page: https://catalog.polo.blue/repair-manuals/engine-1-6-tdi-cr-ea189/00-technical-data/checking-vacuum-system/
- Original document: https://cdn.polo.blue/files/16-tdi-cr-engine-cayacaybcayc-workshop-manual-2019.pdf
- 00 – Technical data, [1.6 TDI CR engine (EA189)](https://catalog.polo.blue/repair-manuals/engine-1-6-tdi-cr-ea189/index.md)
- Previous procedure: [3.1 Rules for cleanliness](https://catalog.polo.blue/repair-manuals/engine-1-6-tdi-cr-ea189/00-technical-data/rules-for-cleanliness/index.md)
- Next procedure: [1.1 Removing engine](https://catalog.polo.blue/repair-manuals/engine-1-6-tdi-cr-ea189/10-removing-and-installing-engine/removing-engine/index.md)

Special tools and workshop equipment required

![](https://catalog.polo.blue/manuals/vw-polo-engine-ea189-16-tdi-cr/f46b6f532c402830.webp)

- Hand vacuum pump - VAS 6213-

**Procedure**

- Check all vacuum lines throughout entire vacuum system for:

- Cracks
- Marten bites
- Crushing
- Porous areas and other leaks

- Check vacuum line to solenoid valve and from solenoid valve to relevant component.
- If event is entered in memory, check vacuum lines to specified component, but also additionally the other vacuum lines to other components.
- If pressure cannot be built up using hand vacuum pump - VAS 6213- or pressure immediately drops again, check hand vacuum pump and connecting hoses for leaks.
