# 4.2 Actuator for structure-borne sound R214 and control unit for structureborne sound J869 (Polo, left-hand drive) – 1.4 TSI engine (EA111)

> VW Polo 6R (Senders and sensors), step by step: structure-borne sound actuator R214, J869 (Polo, LHD) – 4 steps, tightening torques and 1 drawing.

- Web page: https://catalog.polo.blue/repair-manuals/engine-1-4-tsi-ea111/24-mixture-preparation-injection/structure-borne-sound-actuator-r214-and-control-unit-j869/
- Original document: https://cdn.polo.blue/files/engine-CAVA-CAVD-CAVB-CAVC-CAVE-CKMA-CTHA-CTHB-CTHC-CTHD-CTHE-CTKA-CNWA-repair-manual-eng.pdf
- 24 – Mixture preparation - injection, [1.4 TSI engine (EA111)](https://catalog.polo.blue/repair-manuals/engine-1-4-tsi-ea111/index.md)
- Previous procedure: [4.1 Checking fuel pressure sender](https://catalog.polo.blue/repair-manuals/engine-1-4-tsi-ea111/24-mixture-preparation-injection/checking-fuel-pressure-sender/index.md)
- Next procedure: [4.3 Assembly overview – actuator for structure-borne sound R214 and control unit for structure-borne sound J869 (Polo, right-hand drive)](https://catalog.polo.blue/repair-manuals/engine-1-4-tsi-ea111/24-mixture-preparation-injection/assembly-overview-structure-borne-sound-actuator-r214/index.md)

![](https://catalog.polo.blue/manuals/vw-polo-engine-ea111-14-tsi/3aaab8082524f311.webp)

- **1** 8 Nm
- **2** 8 Nm
- **3** Actuator for structure-borne sound - R214-
  - Fitting location: in plenum chamber

**Removing and installing**

- Remove wiper arms ⇒ Electrical system; Rep. gr. 92; Windscreen wiper system; Removing and installing wiper arms.
- Remove plenum chamber cover and plenum chamber bulkhead ⇒ Body - front; Rep. gr. 50.

- **4** Connector
- **5** Bracket
- **6** Connector
  - For removing, push the catch outwards.
- **7** Control unit for structureborne sound - J869-
  - Fitting location: in plenum chamber

**Removing and installing**

- Remove wiper arms ⇒ Electrical system; Rep. gr. 92; Windscreen wiper system; Removing and installing wiper arms.
- Remove plenum chamber cover ⇒ Body - front; Rep. gr. 50.

- **8** Bracket for control unit for structure-borne sound - J869-
  - is removed and installed together with the control unit for structure-borne sound - J869-.

## Tightening torques on this page

### Torque [To the drawing](https://catalog.polo.blue/repair-manuals/engine-1-4-tsi-ea111/24-mixture-preparation-injection/structure-borne-sound-actuator-r214-and-control-unit-j869/#t372-670)
| Item | Part | Torque |
| --- | --- | --- |
| 1 |  | 8 Nm |
| 2 |  | 8 Nm |
