# 2.2 Removing and installing regulating flap control unit J808 and throttle valve module J338 – 1.4 TSI engine (EA111)

> VW Polo 6R (Intake manifold), step by step: removing and installing J808 and throttle valve module J338 – 13 steps, special tool VAS 6340 and 9 drawings.

- Web page: https://catalog.polo.blue/repair-manuals/engine-1-4-tsi-ea111/24-mixture-preparation-injection/removing-and-installing-flap-control-j808-throttle-j338/
- Original document: https://cdn.polo.blue/files/engine-CAVA-CAVD-CAVB-CAVC-CAVE-CKMA-CTHA-CTHB-CTHC-CTHD-CTHE-CTKA-CNWA-repair-manual-eng.pdf
- 24 – Mixture preparation - injection, [1.4 TSI engine (EA111)](https://catalog.polo.blue/repair-manuals/engine-1-4-tsi-ea111/index.md)
- Previous procedure: [2.1 Assembly overview – intake manifold](https://catalog.polo.blue/repair-manuals/engine-1-4-tsi-ea111/24-mixture-preparation-injection/assembly-overview-intake-manifold/index.md)
- Next procedure: [2.3 Cleaning throttle valve module J338](https://catalog.polo.blue/repair-manuals/engine-1-4-tsi-ea111/24-mixture-preparation-injection/cleaning-throttle-valve-module-j338/index.md)

> **Note**
>
> To remove throttle valve module - J338-, regulating flap control unit - J808- must first be removed.

Special tools and workshop equipment required

![](https://catalog.polo.blue/manuals/vw-polo-engine-ea111-14-tsi/76d7fd965f071981.webp)

- Torque wrench - V.A.G 1410-

![](https://catalog.polo.blue/manuals/vw-polo-engine-ea111-14-tsi/c6a78ba681964b2b.webp)

- Hose clamp pliers - VAS 6340- 

Removing regulating flap control unit - J808-

![](https://catalog.polo.blue/manuals/vw-polo-engine-ea111-14-tsi/ce7c9e674b60ab23.webp)

- Lift engine cover panel at points -1- and pull it forwards in direction of -arrow-.
- Remove securing bolts -1-.

![](https://catalog.polo.blue/manuals/vw-polo-engine-ea111-14-tsi/27700fc9b8d5a9fe.webp)

- Pull off all connectors and hose connections on intake connecting pipe -4- and regulating flap control unit - J808-.
- Detach spring-type clips and pull off hose -2- on activated charcoal filter system solenoid valve 1 - N80- and pressure pipe -3-.
- Unscrew securing bolt for pressure pipe -3- on turbocharger and pull pressure pipe -3- off.

![](https://catalog.polo.blue/manuals/vw-polo-engine-ea111-14-tsi/fb9c58c04dc497d2.webp)

- Unscrew intake connecting pipe securing bolts -arrows- and pull intake connecting pipe upwards with regulating flap control unit - J808-.

![](https://catalog.polo.blue/manuals/vw-polo-engine-ea111-14-tsi/3c022707f9a5cf1b.webp)

- Unscrew securing bolts -arrows-.

Removing throttle valve module - J338-

- Detach coolant hose -1- from hose clips.

![](https://catalog.polo.blue/manuals/vw-polo-engine-ea111-14-tsi/cd76da0539d4e6eb.webp)

- Pull connector -2- off intake air temperature sender 3 - G520- with intake manifold pressure sender 3 - G583-.
- Remove charge air hose -3- from throttle valve module - J338- and charge air pipe.

![](https://catalog.polo.blue/manuals/vw-polo-engine-ea111-14-tsi/055a544f59b78334.webp)

- Unscrew securing bolts -arrows- and pull throttle valve module - J338- from intake manifold connection.

**Installing**

Installation is carried out in the reverse order. When installing, note the following:

- Seals and O-rings must be renewed and coated lightly with clean engine oil before installing.
- Hose connections and hoses for charge air system must be free of oil and grease before assembly.
- Secure all hose connections with hose clips which conform to production standard.

![](https://catalog.polo.blue/manuals/vw-polo-engine-ea111-14-tsi/45d23d04f2c5e079.webp)

- Push engine cover panel down at points -1- in direction of -arrow- until it engages.

Specified torques:

Assembly overview - intake manifold [⇒ 2.1 Assembly overview - intake manifold](https://catalog.polo.blue/repair-manuals/engine-1-4-tsi-ea111/24-mixture-preparation-injection/assembly-overview-intake-manifold/#t351-173).

If a new regulating flap control unit or throttle valve module has been installed:

- Erase learnt values and adapt engine control unit - J623- to regulating flap control unit and throttle valve module ⇒ Vehicle diagnostic tester “Guided functions”.

> **Note**
>
> Regulating flap control units with plastic housing need not be adapted to the engine control unit - J623-.
