# 3.7 Removing and installing radiator fan V7 and radiator fan 2 V177 (Polo) – 1.4 TSI engine (EA111)

> VW Polo 6R (Radiator, radiator fan), step by step: removing and installing radiator fans V7, V177 (Polo) – 9 steps and 5 drawings.

- Web page: https://catalog.polo.blue/repair-manuals/engine-1-4-tsi-ea111/19-cooling/removing-and-installing-radiator-fans-v7-v177/
- Original document: https://cdn.polo.blue/files/engine-CAVA-CAVD-CAVB-CAVC-CAVE-CKMA-CTHA-CTHB-CTHC-CTHD-CTHE-CTKA-CNWA-repair-manual-eng.pdf
- 19 – Cooling, [1.4 TSI engine (EA111)](https://catalog.polo.blue/repair-manuals/engine-1-4-tsi-ea111/index.md)
- Previous procedure: [3.3 Assembly overview – radiator/radiator fan (Polo)](https://catalog.polo.blue/repair-manuals/engine-1-4-tsi-ea111/19-cooling/assembly-overview-radiator-radiator-fan-polo/index.md)
- Next procedure: [3.14 Removing and installing radiator with charge air cooler (Polo)](https://catalog.polo.blue/repair-manuals/engine-1-4-tsi-ea111/19-cooling/removing-and-installing-radiator-with-charge-air-cooler-polo/index.md)

**Removing**

- Remove noise insulation ⇒ General body repairs, exterior; Rep. gr. 50; Body - front, noise insulation.

![](https://catalog.polo.blue/manuals/vw-polo-engine-ea111-14-tsi/aa3fee462e00198b.webp)

- Disconnect electrical connector -arrow-.

![](https://catalog.polo.blue/manuals/vw-polo-engine-ea111-14-tsi/c684c9ebc309a01e.webp)

- Pull connector -arrow- from radiator outlet coolant temperature sender - G83-.

![](https://catalog.polo.blue/manuals/vw-polo-engine-ea111-14-tsi/d984714d63a1c665.webp)

- Pull off intake hose -1-.
- Unscrew securing bolts -arrows- and remove intake cowl.

![](https://catalog.polo.blue/manuals/vw-polo-engine-ea111-14-tsi/522431daea4d895f.webp)

- Press both radiator latches in -direction of arrow-.
- Carefully remove cowling -1- downwards together with radiator fans.

![](https://catalog.polo.blue/manuals/vw-polo-engine-ea111-14-tsi/9ba5473b791e9457.webp)

- Disconnect connector -1-.

Depending on which radiator fan is to be removed.

- Unclip line from line guide and unscrew securing nuts -arrows-.

**Installing**

Installation is carried out in the reverse order. When installing, note the following:

**Specified torques**

| Component | Nm |
| --- | --- |
| Radiator fan to air scoop | 5 |
