# 2.4 Removing and installing coolant pump belt pulley (Polo, Touran, Golf Plus, Eos, Tiguan, Scirocco, Golf, Golf Cabriolet) – 1.4 TSI engine (EA111)

> VW Polo 6R, step by step: removing and installing coolant pump pulley (Polo, Golf) – 31 steps, special tool T10154, tightening torques and 16 drawings.

- Web page: https://catalog.polo.blue/repair-manuals/engine-1-4-tsi-ea111/19-cooling/removing-and-installing-coolant-pump-belt-pulley/
- Original document: https://cdn.polo.blue/files/engine-CAVA-CAVD-CAVB-CAVC-CAVE-CKMA-CTHA-CTHB-CTHC-CTHD-CTHE-CTKA-CNWA-repair-manual-eng.pdf
- 19 – Cooling, [1.4 TSI engine (EA111)](https://catalog.polo.blue/repair-manuals/engine-1-4-tsi-ea111/index.md)
- Previous procedure: [2.3 Removing and installing coolant pump (Polo, Touran, Golf Plus, Eos, Tiguan, Scirocco, Golf, Golf Cabriolet)](https://catalog.polo.blue/repair-manuals/engine-1-4-tsi-ea111/19-cooling/removing-and-installing-coolant-pump/index.md)
- Next procedure: [2.5 Removing and installing coolant circulation pump V50 (Polo, Touran, Golf Plus, Eos, Tiguan, Scirocco, Golf, Golf Cabriolet)](https://catalog.polo.blue/repair-manuals/engine-1-4-tsi-ea111/19-cooling/removing-and-installing-coolant-circulation-pump-v50/index.md)

![](https://catalog.polo.blue/manuals/vw-polo-engine-ea111-14-tsi/c6767ab3739bb5aa.webp)

Special tools and workshop equipment required

- Bit XZN 10 - T10154-
- Hose clamp pliers - VAS 6340-
- Torque wrench - V.A.G 1331-

**Removing**

Golf Plus, Eos, Scirocco, Golf, Golf Cabriolet, Touran, Polo

- Remove noise insulation ⇒ General body repairs, exterior; Rep. gr. 50; Body - front, noise insulation.

**Tiguan**

- Depending on vehicle equipment, remove noise insulation or skid plate ⇒ General body repairs, exterior; Rep. gr. 50; Removing and installing noise insulation or skid plate.

**Continued for all vehicles**

![](https://catalog.polo.blue/manuals/vw-polo-engine-ea111-14-tsi/ca52f601f1912076.webp)

- Pull retaining clip in direction of -arrow- and pull out charge air hose -1- from charge air pipe.

> **Note**
>
> Charge air hoses with screw-type clips are also installed.

![](https://catalog.polo.blue/manuals/vw-polo-engine-ea111-14-tsi/8f6ad0527f0219d4.webp)

- Unscrew securing bolt for charge air pipe -arrow-.

![](https://catalog.polo.blue/manuals/vw-polo-engine-ea111-14-tsi/933f45eecdca2a42.webp)

- Remove securing bolt -arrow- for charge air pipe -1-.

![](https://catalog.polo.blue/manuals/vw-polo-engine-ea111-14-tsi/67b41074207b2369.webp)

- Release and pull off connector -1- on oil level and oil temperature sender - G266-.
- Unclip bracket -2- for electric wire to oil level and oil temperature sender - G266-.

Only vehicles with auxiliary heater

- Remove coolant hoses for auxiliary heater.

**Continued for all vehicles **

![](https://catalog.polo.blue/manuals/vw-polo-engine-ea111-14-tsi/4316013bb0d01738.webp)

- Carefully press locking tabs on noise insulation housing for supercharger -arrows- outwards.
- Pull off housing with noise insulation and place to one side.

![](https://catalog.polo.blue/manuals/vw-polo-engine-ea111-14-tsi/757b8e88415e64ce.webp)

- Lift engine cover panel at points -1- and pull it forwards in direction of -arrow-.

![](https://catalog.polo.blue/manuals/vw-polo-engine-ea111-14-tsi/fc36ae6907517430.webp)

- Detach fuel supply line -1- and line leading to activated charcoal filter -2- by pressing the release tabs.

![](https://catalog.polo.blue/manuals/vw-polo-engine-ea111-14-tsi/db4cfed71b2f6c78.webp)

- Pull off hose -1- from pressure pipe.
- Unscrew securing bolts -2- from pressure pipe and remove pressure pipe.

![](https://catalog.polo.blue/manuals/vw-polo-engine-ea111-14-tsi/675be1326065b9d2.webp)

- Unscrew hose clip -1- on charge air pipe.
- Open hose clip -2- and pull out hose.
- Unscrew securing bolt for charge air pipe -3-.
- Remove bracket -4-.

![](https://catalog.polo.blue/manuals/vw-polo-engine-ea111-14-tsi/05ea1ec049c1373c.webp)

- To do so, remove bolts -arrows-.
- Remove bracket -1-.

> **Note**
>
> Charge air pressure sender - G31- with intake air temperature sender 2 - G299- is installed on rear of charge air pipe.

![](https://catalog.polo.blue/manuals/vw-polo-engine-ea111-14-tsi/4b08b4267057ef7b.webp)

- Unscrew bolts -arrows- and remove charge pressure sender - G31- -1-.
- Remove charge air pipe downwards.

![](https://catalog.polo.blue/manuals/vw-polo-engine-ea111-14-tsi/b578cc917243883e.webp)

- Loosen securing bolts -1- for coolant pump pulley.

> **Warning**
>
> As the poly V-belt is still tensioned, the pulley securing bolts must not yet be removed.

- Remove poly V-belt (Golf Plus, Eos, Scirocco, Golf, Golf Cabriolet, Touran, Polo) [⇒ 1.3 Removing and installing poly V-belt (Golf Plus, Eos, Scirocco, Golf, Touran, Polo, Sharan, Passat, Passat CC, Golf Cabriolet)](https://catalog.polo.blue/repair-manuals/engine-1-4-tsi-ea111/13-crankshaft-group/removing-and-installing-poly-v-belt/#t83-239).
- Remove poly V-belt (Tiguan).

![](https://catalog.polo.blue/manuals/vw-polo-engine-ea111-14-tsi/0c25827659a75d85.webp)

- Unscrew securing bolts -1- and pull pulley from coolant pump.

**Installing**

![](https://catalog.polo.blue/manuals/vw-polo-engine-ea111-14-tsi/988694841e211990.webp)

- Position pulley on coolant pump and tighten securing bolts -1- hand-tight.
- Install poly V-belt (Golf Plus, Eos, Scirocco, Golf, Golf Cabriolet, Touran, Polo) [⇒ 1.3 Removing and installing poly V-belt (Golf Plus, Eos, Scirocco, Golf, Touran, Polo, Sharan, Passat, Passat CC, Golf Cabriolet)](https://catalog.polo.blue/repair-manuals/engine-1-4-tsi-ea111/13-crankshaft-group/removing-and-installing-poly-v-belt/#t83-239).
- Install poly V-belt (Tiguan).
- Tighten securing bolts to 24 Nm.

Further installation is carried out in reverse order of removal. When installing, note the following:

Specified torques:

Assembly overview - charge air system [⇒ 3.2 Assembly overview - charge air system (Polo)](https://catalog.polo.blue/repair-manuals/engine-1-4-tsi-ea111/21-turbocharging-supercharging/assembly-overview-charge-air-system-polo/#t328-149)

Assembly overview - intake manifold [⇒ 2.1 Assembly overview - intake manifold](https://catalog.polo.blue/repair-manuals/engine-1-4-tsi-ea111/24-mixture-preparation-injection/assembly-overview-intake-manifold/#t351-173).

![](https://catalog.polo.blue/manuals/vw-polo-engine-ea111-14-tsi/9cb3f79694a17e49.webp)

- Push engine cover panel down at points -1- in direction of -arrow- until it engages.

## Tightening torques on this page

### In the steps
| Step | Torque |
| --- | --- |
| Tighten securing bolts to 24 Nm. | 24 Nm |
