# 1.9 Checking cooling system for leaks (Polo, Touran, Golf Plus, Eos, Scirocco, Golf, Golf Cabriolet) – 1.4 TSI engine (EA111)

> VW Polo 6R (Cooling system/coolant), step by step: checking cooling system for leaks (Polo, Golf, Eos, Touran) – 13 steps and special tool V.A.G 1274 B.

- Web page: https://catalog.polo.blue/repair-manuals/engine-1-4-tsi-ea111/19-cooling/checking-cooling-system-for-leaks/
- Original document: https://cdn.polo.blue/files/engine-CAVA-CAVD-CAVB-CAVC-CAVE-CKMA-CTHA-CTHB-CTHC-CTHD-CTHE-CTKA-CNWA-repair-manual-eng.pdf
- 19 – Cooling, [1.4 TSI engine (EA111)](https://catalog.polo.blue/repair-manuals/engine-1-4-tsi-ea111/index.md)
- Previous procedure: [1.6 Draining and filling coolant (Polo)](https://catalog.polo.blue/repair-manuals/engine-1-4-tsi-ea111/19-cooling/draining-and-filling-coolant-polo/index.md)
- Next procedure: [2.1 Assembly overview – thermostat](https://catalog.polo.blue/repair-manuals/engine-1-4-tsi-ea111/19-cooling/assembly-overview-thermostat/index.md)

![](https://catalog.polo.blue/manuals/vw-polo-engine-ea111-14-tsi/ac286764f2a4d64c.webp)

Special tools and workshop equipment required

- Cooling system tester - V.A.G 1274 B-
- Adapter for cooling system tester - V.A.G 1274/8-
- Adapter for cooling system tester - V.A.G 1274/9-

**Prerequisites for check**

- Engine at operating temperature.

**Test sequence**

> **Warning**
>
> Hot steam may escape when expansion tank is opened. Place cloth over cap and open with caution.

- Open cap on coolant expansion tank.
- Screw adapter for cooling system tester - V.A.G 1274/8- onto expansion tank.
- Clamp connector - V.A.G 1274 B/1- into adapter for cooling system tester - V.A.G 1274/8-.
- Join connection piece - V.A.G 1274 B/1- to cooling system tester - V.A.G 1274 B- using connecting hose supplied.

- Use hand pump on tester to create a pressure of about 1.0 bar.

> **Warning**
>
> Risk of scalding! Before disconnecting cooling system tester - V.A.G 1274 B- from connecting hose or connector - V.A.G 1274 B/1-, always relieve existing pressure. To do this, press pressure relief valve on cooling system tester - V.A.G 1274 B- until pressure gauge displays value of »0«.

If the pressure drops:

- Find leaks and rectify.

Check pressure relief valve in cap.

- Screw cap into adapter for cooling system tester - V.A.G 1274/9-.
- Clamp connector - V.A.G 1274 B/1- into adapter for cooling system tester - V.A.G 1274/9-.
- Join connection piece - V.A.G 1274 B/1- to cooling system tester - V.A.G 1274 B- using connecting hose supplied.
- Use hand pump on cooling system tester to create a pressure of max. 1.4 bar.

The pressure relief valve must still remain closed.

If the pressure relief valve opens prematurely:

- Renew sealing cap.
- Increase pressure to over 1.4 bar.

The pressure relief valve must open.

If the pressure relief valve does not open:

- Renew sealing cap.
