# Tightening torques – 7-speed DSG gearbox 0AM (DQ200)

> Every tightening torque the 7-speed DSG gearbox 0AM (DQ200) manual gives for the VW Polo 6R/6C, by repair group and procedure. Each one links to its drawing or table in the procedure.

- Web page: https://catalog.polo.blue/repair-manuals/dsg-gearbox-0am-dq200/torques/
- Original document: https://cdn.polo.blue/files/7-speed_dual_clutch_transmission_0am-eng.pdf
- [7-speed DSG gearbox 0AM (DQ200)](https://catalog.polo.blue/repair-manuals/dsg-gearbox-0am-dq200/index.md)

## 00 – General, Technical Data

### [7.1 Tools](https://catalog.polo.blue/repair-manuals/dsg-gearbox-0am-dq200/00-general-technical-data/tools/index.md)

#### In the steps
| Step | Torque |
| --- | --- |
| Uncertainties often exist on smaller screws with lower tightening specifications. The Torque Wrench 1783 - 2-10Nm - VAG1783- can be used for these bolts. | 10Nm |

### [7.2 Transmission](https://catalog.polo.blue/repair-manuals/dsg-gearbox-0am-dq200/00-general-technical-data/transmission/index.md)

#### In the steps
| Step | Torque |
| --- | --- |
| Tightening specification for bolts: 8 Nm | 8 Nm |

#### Torque
| Item | Part | Torque |
| --- | --- | --- |
| 8 | Oil Drain Plug | 30 Nm |

## 30 – Clutch

### [1.1 Overview – Dual Clutch, through Transmission Production Date 05/2011](https://catalog.polo.blue/repair-manuals/dsg-gearbox-0am-dq200/30-clutch/dual-clutch-overview-up-to-05-2011/index.md)

#### In the steps
| Step | Torque |
| --- | --- |
| 6 - Bolts | 8 Nm +90° |

### [1.3 “K 1” and “K 2” Clutch Engaging Bearing Position, Adjusting, Transmission Production Date through 05/2011](https://catalog.polo.blue/repair-manuals/dsg-gearbox-0am-dq200/30-clutch/k1-k2-engaging-bearing-position-adjusting-up-to-05-2011/index.md)

#### Torque
| Item | Part | Torque | Notes |
| --- | --- | --- | --- |
| 6 | Bolts | 8 Nm +90° | Always replace after removing |

### [2.1 Overview – Dual Clutch, Transmission Production Date from 06/2011](https://catalog.polo.blue/repair-manuals/dsg-gearbox-0am-dq200/30-clutch/dual-clutch-overview-from-06-2011/index.md)

#### Torque [To the drawing](https://catalog.polo.blue/repair-manuals/dsg-gearbox-0am-dq200/30-clutch/dual-clutch-overview-from-06-2011/#t44-427)
| Item | Part | Torque | Notes |
| --- | --- | --- | --- |
| 13 | Bolts | 8 Nm +90° | Always replace after removing |

### [2.3 “K 1” and “K 2” Clutch Engaging Bearing Position, Adjusting, Transmission Production Date from 06/2011](https://catalog.polo.blue/repair-manuals/dsg-gearbox-0am-dq200/30-clutch/k1-k2-engaging-bearing-position-adjusting-from-06-2011/index.md)

#### Torque
| Item | Part | Torque | Notes |
| --- | --- | --- | --- |
| 9 | Bolts | 8 Nm +90° | Always replace after removing |

## 34 – Controls, Housing

### [3.2 Overview – Mechatronic](https://catalog.polo.blue/repair-manuals/dsg-gearbox-0am-dq200/34-controls-housing/overview-mechatronic/index.md)

#### Torque [To the drawing](https://catalog.polo.blue/repair-manuals/dsg-gearbox-0am-dq200/34-controls-housing/overview-mechatronic/#t108-292)
**All items:** Always replace after removing

| Item | Part | Torque | Notes |
| --- | --- | --- | --- |
| 1 | Bolt | 10 Nm | M8 x 35 |
| 2 | Bolt | 10 Nm | M8 x 90 |

### [3.3 DSG Transmission Mechatronic J743, Removing with Transmission Installed](https://catalog.polo.blue/repair-manuals/dsg-gearbox-0am-dq200/34-controls-housing/mechatronic-j743-removing-gearbox-installed/index.md)

#### In the steps
| Step | Torque |
| --- | --- |
| Tightening specification: 8 Nm. | 8 Nm |

### [3.4 DSG Transmission Mechatronic J743, Moving into »Removal Position« by Hand](https://catalog.polo.blue/repair-manuals/dsg-gearbox-0am-dq200/34-controls-housing/mechatronic-j743-moving-into-removal-position/index.md)

#### In the steps
| Step | Torque |
| --- | --- |
| Bolt tightening specification -arrows-: 8 Nm +90° additional turn. | 8 Nm +90° |

### [3.5 DSG Transmission Mechatronic J743, Installing](https://catalog.polo.blue/repair-manuals/dsg-gearbox-0am-dq200/34-controls-housing/mechatronic-j743-installing/index.md)

#### In the steps
| Step | Torque |
| --- | --- |
| Diagonally tighten the Mechatronic to 10 Nm. | 10 Nm |
| Tightening Specification: 8 Nm. | 8 Nm |

### [7 Special Tools](https://catalog.polo.blue/repair-manuals/dsg-gearbox-0am-dq200/34-controls-housing/special-tools/index.md)

#### In the steps
| Step | Torque |
| --- | --- |
| Torque Wrench 1331 5-50Nm - VAG1331- | 50Nm |

## 35 – Gears, Shafts

### [2.1 Parking Lock Cover, Removing and Installing](https://catalog.polo.blue/repair-manuals/dsg-gearbox-0am-dq200/35-gears-shafts/parking-lock-cover-removing-and-installing/index.md)

#### In the steps
| Step | Torque |
| --- | --- |
| Bolt tightening specification -arrows-: 8 Nm +90° additional turn. | 8 Nm +90° |

#### Torque
| Part | Torque |
| --- | --- |
| Parking lock cover to transmission housing | 8 Nm |
| Transmission selector lever to selector shaft. | 15 Nm |

### [2.2 Parking Lock, Removing and Installing](https://catalog.polo.blue/repair-manuals/dsg-gearbox-0am-dq200/35-gears-shafts/parking-lock-removing-and-installing/index.md)

#### Torque
| Part | Torque |
| --- | --- |
| Parking lock to the transmission housing • Replace the bolts after removing them. | 20 Nm +90° |

## 39 – Final Drive, Differential

### [1.2 Right Stub Shaft Seal, Replacing](https://catalog.polo.blue/repair-manuals/dsg-gearbox-0am-dq200/39-final-drive-differential/right-stub-shaft-seal-replacing/index.md)

#### In the steps
| Step | Torque |
| --- | --- |
| Tighten the stub shaft bolt to 30 Nm. Push the stub shaft against the transmission so that the bolt engages in the thread. | 30 Nm |

### [1.3 Left Stub Shaft Seal, Replacing](https://catalog.polo.blue/repair-manuals/dsg-gearbox-0am-dq200/39-final-drive-differential/left-stub-shaft-seal-replacing/index.md)

#### In the steps
| Step | Torque |
| --- | --- |
| Tighten the stub shaft bolt to 30 Nm. Push the stub shaft against the transmission so that the bolt engages in the thread. | 30 Nm |

### [1.4 Right Flange Shaft Seal, Replacing](https://catalog.polo.blue/repair-manuals/dsg-gearbox-0am-dq200/39-final-drive-differential/right-flange-shaft-seal-replacing/index.md)

#### In the steps
| Step | Torque |
| --- | --- |
| Tighten the new screw to 30 Nm. Push the flange shaft against the transmission so that the bolt engages in the thread. | 30 Nm |

### [1.5 Left Flange Shaft Seal, Replacing](https://catalog.polo.blue/repair-manuals/dsg-gearbox-0am-dq200/39-final-drive-differential/left-flange-shaft-seal-replacing/index.md)

#### In the steps
| Step | Torque |
| --- | --- |
| Tighten the new bolt to 30 Nm. Push the flange shaft against the transmission so that the bolt engages in the thread. | 30 Nm |
